Nascarfreak 0 #1 Posted September 8, 2019 Ok. Got my father in laws old Wheel Horse. Installed a new battery (needed) Still won’t turn over. Looks like the safety switches are jumpered already of course knowing him. Under the seat and fenders I found the seat switch jumped g&w wires but there is pink and yellow wires just cut. Can’t find the other ends or what they would go to. Might this be the problem? The PTO and something else are jumped under the hood. Thanks for any help Share this post Link to post Share on other sites
stevasaurus 22,197 #2 Posted September 8, 2019 That is a 1997...here is the manual for the wiring and more. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,441 #3 Posted September 8, 2019 These detailed diagrams are easier to understand. Each circuit has it's own diagram. Garry Share this post Link to post Share on other sites
953 nut 51,014 #4 Posted September 8, 2019 (edited) Hi @Nascarfreak, I would have answered earlier but was watching the #4 Ford stomp the field. You would be will served to start fresh with the wiring rather than attempting to correct mistakes made by others. here is a color coded wiring diagram done by @BOB ELLISON that will be helpful. If your engine is a Magnum rather than battiry ignition system a few changes will need to be made. Edited September 8, 2019 by 953 nut Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,441 #5 Posted September 8, 2019 A 1996 or 1997 model will have magneto ignition. Garry 1 Share this post Link to post Share on other sites
BOB ELLISON 2,976 #6 Posted September 9, 2019 Richard @953 nut I don't think that wiring diagram will work on his tractor. 1 Share this post Link to post Share on other sites