What model is this ?

[Sparkey 40]

Thanks for the help 

not sure on this machine most of my knowledge is in the C and D series.

 

[Shynon 7,484]

Looks like a 702

[Chris G 3,361]

I'd agree on a 702. 

[953 nut 60,391]

    Nice find, this manual should be helpful.   

 

[The Tuul Crib 7,339]

Nice!!

[Pullstart 67,092]

12 hours ago, Shynon said:

Looks like a 702

 

10 hours ago, Chris G said:

I'd agree on a 702. 

 

I first thought maybe 753 just guessing...  school me fellas, what made you both say 702?

[Chris G 3,361]

@pullstart for me the the first few things that say 702 are the front axle and the solid steel dash plate and the lift stop/ guide.

[Pullstart 67,092]

3 minutes ago, Chris G said:

@pullstart for me the the first few things that say 702 are the front axle and the solid steel dash plate and the lift stop/ guide.

 

Yep, ok.  I’ll have To look at two different axles again, but I see the dash plate.  The 753 parts I used for Frank had a one piece dash/tank and the 502 was two piece.  Not talking about a gasketed tank, just the dash area.

[Sparkey 40]

So going to take a look at this tractor today it runs and drives looks like has the wrong seat pan and steering wheel guy is asking $250 fair price ? 

He also has a 607 for $250 with a replacement engine 

 

[Lee1977 7,232]

I don't see a belt guard on either. Be sure to get the belt guard if he has them.

[FarmboyFresh 69]

if this fits i can probably get my hands on it for you.

[Sparkey 40]

Thanks guys I did notice the belt guard 

will let you know what I find out when I take a look at it. 

[953 nut 60,391]

40 minutes ago, Lee1977 said:

I don't see a belt guard on either. Be sure to get the belt guard if he has them.

            The belt guard you need is for the drive belt on the right side of both tractors. In addition to keeping you safe the belt guard will catch the slack of the drive belt when the clutch is depressed allowing the belt to stop. Without the guard you will be grinding gears all the time when you shift into gear with the engine running.

The starter/generator guard that @FarmboyFresh has may be for the larger 10 and 12 HP engines, you will need some measurements to know if it will work for you.

[FarmboyFresh 69]

15 minutes ago, 953 nut said:

            The belt guard you need is for the drive belt on the right side of both tractors. In addition to keeping you safe the belt guard will catch the slack of the drive belt when the clutch is depressed allowing the belt to stop. Without the guard you will be grinding gears all the time when you shift into gear with the engine running.

The starter/generator guard that @FarmboyFresh has may be for the larger 10 and 12 HP engines, you will need some measurements to know if it will work for you.

I will be getting my hands on that guard and another one for what you are talking about this weekend.. I don't think either will work for me but may work for others.. I will post a picture of the other one shortly

[FarmboyFresh 69]

I can get dims on both this weekend

[Sparkey 40]

Looked at the tractors guy didn’t want to split them up I was only interested in the 702 . But both run good but missing a lot of original parts. I passed on them if anybody is interested they are in Worcester ma . I can pass along the info

[953 nut 60,391]

1 hour ago, Sparkey said:

I passed on them if anybody is interested

                          Best to look for the model you want with the greatest degree of completeness. Finding missing parts can cost more than the tractor did.