Jump to content
woodbird007

Leaking Sunstrand

By woodbird007, in Transmissions and transaxles

Recommended Posts

woodbird007    16

woodbird007
Posted

Very strong hydro on B100 automatic. Long story short, I fell off tractor, it ran against wall and keep working for several seconds before I was able shut it off. Now major hydro leak. Feedback on transmission prognosis and repairability please.  Btw, I suffered skinned knee and jammed shoulder. Lol

  • Sad 1
  • Heart 1

Share this post

Link to post
Share on other sites
 

oliver2-44    11,694

oliver2-44
Posted

Good to hear you only got minor injuries. Can you give us more details on where the leak is or some pictures

Share this post

Link to post
Share on other sites
 

stevasaurus    23,802

stevasaurus
Posted

More information would be great, but I will tell you the trans is fixable.  :occasion-xmas:

Share this post

Link to post
Share on other sites
 

pfrederi    21,046

pfrederi
Posted

Sunstrand leaks if you do not have hydraulic lift are usually in the motion control it would run down the front of the transaxle and drip near the front. Whre is you rs dripping???

  • Like 1

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • eo1bart
      8 speed uni drive with 1 1/8” axles
      By eo1bart
      Looking for a gearbox with 1 1/8" axles for my 312. Ok if it needs rebuilding.
      Located in the New England area
    • cheesegrader
      foot pedal conversion for hydro drive
      By cheesegrader
      About a decade ago, I bought a conversion kit here to remove the column drive lever and convert to a foot pedal for a 520h.
      I would like to convert a second tractor, and I need to replace one of the linkage bars on the first one that has cracked, but I can't find the vendor any more.
      Does anyone remember who made this awesome mod, and where I can find them?
    • Oily Charger 10
      Kohler knocking sound found and small oil leak
      By Oily Charger 10
      My Kohler Mystery engine has been making a knocking sound at low rpm. It sounds like this: do, do, do, do… do, do… do, do, do, do…
       
      here his a video all about. 
      I would like some help. So far the camshaft is the thing making sound I think. I will be taking out the grenade gears… 
    • giant_g2
      8 spd Transmission for sale
      By giant_g2
      Not sure on specific model. This 8 spd came attached to a plow I bought. It had some water in it for a couple weeks according to the prior owner. I drained it, sloshed some diesel in it, drained that, then filled with fresh oil. Spinning the input shaft by hand, I can see the axels turn. Hasn't leaked any oil. I'm not really interested in shipping, so I'd prefer local sales.

    • Doug B
      GT14
      By Doug B
      Hey guys,I have a dilemma I need some help with. I have a 1969 GT 14 that I replaced the transmission and pump on. For about 2 weeks afterward everything worked great, but while mowing at a pretty good pace I noticed a shudder and the tractor slowed a little but not bad. The more I rode it the slower it got until it barely moves. What stumps me is the hydraulics are still very strong,as in I can back the 3 point under the bumper of my truck and if you lift the arms all the way up the front wheels of the tractor will clear the ground. Have checked the tow valve and checked the internal filter,but no luck. I have also checked and replaced the forward and reverse bypass springs and the lever is moving the cam to full travel, forward and reverse. Any help would be appreciated.
×
×
  • Create New...