porkchop 1 #1 Posted March 26, 2009 I want to replace all 3 belts on my 312-8 the deck number is 05-42ms02-35815 . The other # is 1154. I would like to buy the belts at napa or autozone if possible. i need sizes or part number. thanks :omg: Share this post Link to post Share on other sites
WheelHorse_of_course 99 #2 Posted March 26, 2009 From the links section: Wheel Horse 1956-1999 Lubrication Recommendations, Drive Belt & Mower Blade Usage Charts Yes, this is IT! Download and keep a copy! http://www.wolverine-synthetics.com/pages/...lubrication.pdf or http://www.mytractorforum.com/images/reference/lube_rec.pdf Share this post Link to post Share on other sites
mcwh1950 2 #3 Posted March 26, 2009 hope this help you porkchop. v belt belt for all 3 spindles is p/n 6738 for a wheel horse belt 86"long by 1/2 width. gates p/n 6886 napa p/n 4l86ow v belt for the mule drive is p/n 102742 wheel horse 103.1/4 long by 1/2width or.5 toro 103" long by 1/2 width or . 5 gates p/n 6378 napa p/n 6375 my deck only have two belt on it. if the other belt you're taking about is the belt for the trans drive. it's p/n 108501 what is p/n 1154 for. 81.5 long by .625 width gates p/n 6982 napa p/n 5l82ow this is a picture if the other part of the deck, Share this post Link to post Share on other sites
past7971 0 #4 Posted March 26, 2009 Hey Smitty & Porkchop--I was looking at Smitty's post and a couple things caught my eye. The cooling fan on the drive belt pulley. I dont think thats correct for a 8-speed in 312 and/or is that diagram for hydro? Also the deck diagram appear to be a 48" deck because of brace and "square" belt covers. For what its worth Smitty, I used model 21-12K801 for a 1985 312-8 and model 05-42MS02 for the deck and got same info. I think the Master Parts Viewer might be wrong---Anyone else know for sure??? Share this post Link to post Share on other sites
porkchop 1 #5 Posted March 26, 2009 Thanks I got the deck repainted, blades sharpened and put back on.I mowed with it today using old belts and will purchase new on pay day.I,m going to need new blades also. It seems like it,s going to be a great tractor!!! :omg: Share this post Link to post Share on other sites
C-Series14 15 #6 Posted March 26, 2009 Drive belt for an 8-speed is 7478... Share this post Link to post Share on other sites
TT-(Moderator) 1,129 #7 Posted March 26, 2009 Drive belt for an 8-speed is 7478... Actually it's 7473 for the 312-8 in question. (21/32" X 82") 7478 is for some of the older hydro tractors. Share this post Link to post Share on other sites
C-Series14 15 #8 Posted March 26, 2009 Well poop!!!! That will teach me for having only one tab open on the laptop and then trying to remember the number 2 minutes later!!! Share this post Link to post Share on other sites