pequeacubs 3 #1 Posted August 29, 2018 I was wondering what the stock belt size was for these lawn rangers. I just picked this up it has a newer 5hp briggs on it. i was hoping to get the stock belt length so i have some where to start. 1 Share this post Link to post Share on other sites
pfrederi 18,454 #2 Posted August 29, 2018 Old WH # 1576 replaced by 9691 70" x 1/2" belt 1 Share this post Link to post Share on other sites
WHX?? 51,060 #3 Posted August 29, 2018 I would start with a 70 incher but get a 69 and 71 and see what fits best. Never know if the PO changed pulley sizes or relocated the motor a little. Can always return the one that don't fit the best as long as they have not been run a lot or scuffed up. . Saves the multiple trips to the v-belt store. Nice looking LR BTW 1 Share this post Link to post Share on other sites
pequeacubs 3 #4 Posted August 29, 2018 will do thank you Share this post Link to post Share on other sites
Tankman 3,523 #5 Posted August 30, 2018 Tractor Supply, Huskee Kevlar belts on the shelf. Kevlar belts are green = oil and grease resistant. Never had one fail. 1 Share this post Link to post Share on other sites
pequeacubs 3 #6 Posted August 30, 2018 thanks for all your replies i started with a 60" but to tight. I am going to 62-64" I Think that should work Share this post Link to post Share on other sites
953 nut 58,692 #7 Posted August 31, 2018 The 70" X 1/2" belt would be an A-68 or 4L700. The sleeve on the belts at Tractor Supply will have both size designation on them. Share this post Link to post Share on other sites
Tankman 3,523 #8 Posted August 31, 2018 The Lawn Ranger likes the Huskee Kevlar belts at Tractor Supply too. Ask him. 1 Share this post Link to post Share on other sites
