Tgtack 779 #1 Posted June 9, 2018 I have a K91 on a WH 400 that does not have spark. If I don't have time to get to it, would anyone be interested in checking it out if I bring it? I have new points, condenser, and a coil, will have a new plug in it. Have not changed points or coil on one of these before so could use a hand! Will be in Chambersburg Wednesday evening at Comfort Inn and camping at the show. 3 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,034 #2 Posted June 10, 2018 Wrenching before of after dinner? Bring it and bring some fine sandpaper she will run. 5 2 Share this post Link to post Share on other sites
19richie66 16,877 #3 Posted June 10, 2018 We’ll have a tech session before dinner if you are there early enough. If not we can have a late night wrench session after dinner if we don’t all fall asleep. I’m staying at the same place. 2 1 Share this post Link to post Share on other sites
Tgtack 779 #4 Posted June 10, 2018 Thanks guys, arrival depends on how fast I can pull wife away from the food pantry she manages on Wednesday! 2 1 Share this post Link to post Share on other sites
Tgtack 779 #5 Posted June 10, 2018 Looks like she is getting someone to fill in so should be there early Wednesday. 1 Share this post Link to post Share on other sites
stevasaurus 22,229 #6 Posted June 10, 2018 Do you mean the Comfort Inn in Scotland...up the road from Chambersburg?? Share this post Link to post Share on other sites
Tgtack 779 #7 Posted June 10, 2018 On old Scotland road, chambersburg Share this post Link to post Share on other sites
953 nut 51,485 #8 Posted June 10, 2018 28 minutes ago, stevasaurus said: Do you mean the Comfort Inn in Scotland...up the road from Chambersburg?? 23 minutes ago, Tgtack said: On old Scotland road, chambersburg That is the place! Share this post Link to post Share on other sites
