702854boy 1,201 #26976 Posted 22 hours ago @8ntruck, I could get you an 1/8 inch e clip from work and just mail it out to you if you want 1 Share this post Link to post Share on other sites
Chris689 339 #26977 Posted 22 hours ago Got both machines suited up this morning for whatever mild CT winter we get this year. Then decided to give the new transmission a work out by clearing a spot that had been used for dumping by the p/o of the house. Got just enough cleared to fit my 14' trailer. Hopefully i have time to clear the other half of the area before we see any snow. 4 2 Share this post Link to post Share on other sites
squonk 48,337 #26978 Posted 12 hours ago 12 hours ago, Handy Don said: PO: "They greased it at the factory, right? So it should go 60-80 years before I need to grease anything" I got called to a school that had a bad vibration in the kitchen ceiling. I get there and the lunch lady says "When we turn the hood fan on we get this racket!" I ask how long has it done this? She says "a couple of years. We just turn the radio up louder! Now we can't hear the radio!" I find the Facilities Director to show me roof access as it's 2 stories to the roof and My ladder ain't reaching it. He says "yeah, it's been noisy for a couple of years now. I get to the exhaust fan. Looks like it's almost new. So are the grease fittings. Never been touched and the belt is in tatters. I guess their grease gun was "too heavy" to carry up the stairs to the roof! 2 3 Share this post Link to post Share on other sites
Ed Kennell 47,824 #26979 Posted 11 hours ago 53 minutes ago, squonk said: grease fittings. Never been touched and the belt is in tatters Where's Pete when we need him? 1 Share this post Link to post Share on other sites
peter lena 10,109 #26980 Posted 11 hours ago @pfrederi yup that looks like the standard I regularly see on just about anything , kinda like no oil on the dip stick ? or bragging about failure ? ever see a sun baked a mower deck? or recovered paint ? how about a burned out , pto drive clutch disc ? impossible to correct the cause of that , spring pull on a cable ? YOU CAN,T DO THAT , rusty pete 1 Share this post Link to post Share on other sites
squonk 48,337 #26981 Posted 3 hours ago (edited) Summer like weather! Dragged the Yard Art Suburban out of the chicken coup and placed it in the yard for the Christmas Decor. I have a lighted Doggie to go on the seat but that will come once Dec. hits. Edited 2 hours ago by squonk 7 1 Share this post Link to post Share on other sites
8ntruck 9,386 #26982 Posted 1 hour ago 22 hours ago, ebinmaine said: What's the Kohler part number? Per the ipl in Jack's Small Engine web site it is 235278S. I'm planning a stop at the local NAPA store to see what they can come up with. Might be an assortment box. I'm shy on E clip stock here, so something like that would be a good addition to my spare hardware collection. Turns out my neighbor does not have a selection of E clips either, so this will be a resource for him as well. 1 Share this post Link to post Share on other sites
ebinmaine 81,149 #26983 Posted 58 minutes ago 3 minutes ago, 8ntruck said: Per the ipl in Jack's Small Engine web site it is 235278S. I'm planning a stop at the local NAPA store to see what they can come up with. Might be an assortment box. I'm shy on E clip stock here, so something like that would be a good addition to my spare hardware collection. Turns out my neighbor does not have a selection of E clips either, so this will be a resource for him as well. Lemme know if you need something pr come up empty. It's unlikely I'll have that specific Kohler number but I do have an e clip assortment here. 1 Share this post Link to post Share on other sites