pfrederi 20,619 #26226 Posted 17 hours ago One set up is for floating the other allow down pressure 1 Share this post Link to post Share on other sites
DLF 60 #26227 Posted 15 hours ago 17 hours ago, MainelyWheelhorse said: I also gave the muffler on the C-141 a touch up as the high heat paint was coming off where the exhaust turned and went up the pipe. It’s been a productive day. That muffler may melt your Wheel Horse decal. 2 Share this post Link to post Share on other sites
MainelyWheelhorse 2,640 #26228 Posted 12 hours ago @DLF It seems to be fine so far. The muffler is about 2 1/2 inches away from it. There has been no discoloration or visible heat damage after the decal has been on there since the end of October. I’ll keep an eye on it though. Thanks for the heads up. 2 Share this post Link to post Share on other sites
kpinnc 18,310 #26229 Posted 8 hours ago 4 hours ago, MainelyWheelhorse said: about 2 1/2 inches away from it Plenty far enough away. A couple of mine are closer than that and they don't damage the decals. 2 Share this post Link to post Share on other sites
MainelyWheelhorse 2,640 #26230 Posted 6 hours ago 1 hour ago, kpinnc said: Plenty far enough away. A couple of mine are closer than that and they don't damage the decals. That’s what I thought when I was figuring out how far out to cut the exhaust extension. Enough to not be a damage magnet but close enough to not damage the decals/paint. So far so good. Share this post Link to post Share on other sites
