wallfish 19,965 #25551 Posted March 25 44 minutes ago, Sparky said: Dethatched the yard today, first time I’ve even done it on this yard. The 867 was awarded the job and performed flawlessly. Hmmm, what do you charge for about an acre ? And I KNOW for fact you have spreaders for some fertilizers too! See ya next weekend! LOL (Gotta get all that crap done before the engine show season begins and it's creeping up on us!) 3 2 Share this post Link to post Share on other sites
Sparky-(Admin) 25,253 #25552 Posted March 25 9 hours ago, wallfish said: (Gotta get all that crap done before the engine show season begins and it's creeping up on us!) Yep! April 26 is the first one 1 Share this post Link to post Share on other sites
squonk 46,493 #25553 Posted March 25 Still got the Frosties in the ground here and when it gets warm too wet. I have managed to get about 30 lbs. of dog muffins off the back yard. Got a few hundred pine cones to move once conditions improve enough to get a tractor on the grass. 1 Share this post Link to post Share on other sites
kpinnc 18,151 #25554 Posted March 25 Spraying fences again today. Have to do this once every couple years. You can see the difference in front of the tractor vs behind... 6 7 Share this post Link to post Share on other sites
Bill D 2,841 #25555 Posted March 25 12 hours ago, Sparky said: Yep! April 26 is the first one Where at? Share this post Link to post Share on other sites
MainelyWheelhorse 2,535 #25556 Posted March 26 This was more of a Wheel Horse tractor accessory day. The old ATV tires that were on my trailer that I sometimes use behind my tractors needed some TLC. One tire had developed a leak, both needed valve stems and had pretty severe weather cracking. So I had some extra tractor tires which held air and some spare hubs so I swapped them. I may swap them back later but at least now I can move and use the trailer until I decide what I want to do. 5 1 Share this post Link to post Share on other sites
Sparky-(Admin) 25,253 #25557 Posted March 27 On 3/25/2026 at 7:07 PM, Bill D said: Where at? Share this post Link to post Share on other sites
Chris689 268 #25558 Posted March 27 3 hours ago, Sparky said: How have I never heard of this? This is only a few towns over from me. I really gotta do some deeper searches on google I guess lol. 1 1 Share this post Link to post Share on other sites
Sparky-(Admin) 25,253 #25559 Posted March 27 14 hours ago, Chris689 said: How have I never heard of this? This is only a few towns over from me. I really gotta do some deeper searches on google I guess lol. I’ll send you a PM with a huge list of local (and some not so local) shows 1 Share this post Link to post Share on other sites
ebinmaine 78,761 #25560 Posted March 27 28 minutes ago, Sparky said: I’ll send you a PM with a huge list of local (and some not so local) shows Remember the Berwick Meet n Greet!! 1 Share this post Link to post Share on other sites
squonk 46,493 #25561 Posted March 27 First show ( and only ) around here that even sniffs at garden tractors is in August! 1 Share this post Link to post Share on other sites
ebinmaine 78,761 #25562 Posted March 27 14 minutes ago, squonk said: First show ( and only ) around here that even sniffs at garden tractors is in August! I'm not even remotely familiar with the (semi) local show scene. We've been going to a couple per year. Owl's Head Transportation Museum is very welcoming to all exhibitors for all shows. Normally we attend the Truck & Tractor show but we've been really enjoying the Air Show. This year we have a lot going on in the camping & hiking schedule and also MANY things happening at home. Only one tractor related show for us this year. @JCM Jim's event in September. 2 Share this post Link to post Share on other sites
Chris689 268 #25563 Posted March 27 Pulled all three tractors out of their trailer today. Need to use the trailer for something else tomorrow, but also got the the Brinly mounted up to the 73 today and switched the AGs over to the 73 from the 77 for temp use. 5 5 Share this post Link to post Share on other sites
hotajax 270 #25564 Posted March 27 Replaced the rubber hood latches on my 314. Used a rivet tool I bot at Harbor Freight. I put in the four rivets, and the Harbor Freight tool promptly broke. Like it was supposed to. Since I bot it that day, got my pesos back. You can't take HF seriously. 2 2 2 Share this post Link to post Share on other sites
johnnymag3 2,646 #25565 Posted March 29 (edited) On 3/27/2026 at 7:22 PM, hotajax said: Replaced the rubber hood latches on my 314. Used a rivet tool I bot at Harbor Freight. I put in the four rivets, and the Harbor Freight tool promptly broke. Like it was supposed to. Since I bot it that day, got my pesos back. You can't take HF seriously. HARBOR FRAUD Edited March 29 by johnnymag3 1 Share this post Link to post Share on other sites
702854boy 753 #25566 Posted March 29 Took a trip yesterday to about 45 minutes away and got four 8 inch cragar hubcaps to put on the tractors for only 30 bucks. Two of them are mounted on the 702 and the front tires are 17/9.50-8 Goodyears, I believe they are what used to come on the lawn rangers 4 1 2 Share this post Link to post Share on other sites
702854boy 753 #25567 Posted March 29 I also took a photo shoot with the three running Wheel Horses and something else thats pretty special 6 3 Share this post Link to post Share on other sites
pfrederi 20,492 #25568 Posted March 29 7 minutes ago, 702854boy said: Took a trip yesterday to about 45 minutes away and got four 8 inch cragar hubcaps to put on the tractors for only 30 bucks. Two of them are mounted on the 702 and the front tires are 17/9.50-8 Goodyears, I believe they are what used to come on the lawn rangers Tires are interesting but how do you start it??? (no belt on S/G 1 Share this post Link to post Share on other sites
lynnmor 8,810 #25569 Posted March 29 5 minutes ago, 702854boy said: I also took a photo shoot with the three running Wheel Horses and something else thats pretty special That is a nice snow shovel, most are plastic today. 3 Share this post Link to post Share on other sites
702854boy 753 #25570 Posted March 29 Just now, pfrederi said: Tires are interesting but how do you start it??? (no belt on S/G I have to use a rope to start it temporarily, the s/g for it was off getting rebuilt and last night I tried putting the s/g from our new 854 that we haven't tried to get running yet but when it was running the regulator got pretty hot on the bottom so I just disconnected the s/g from the engine temporarily until the correct one for it makes its way back home and we can use it. I'm a little impatient so i didn't feel like waiting till Tuesday to drive it. Just need to make sure to watch the volt meter though so we don't kill the battery too much. 1 Share this post Link to post Share on other sites
pfrederi 20,492 #25571 Posted March 29 8 minutes ago, 702854boy said: I also took a photo shoot with the three running Wheel Horses and something else thats pretty special Father had a 1959 Chevy Impala 4dr hard top Gray 283 powerglide loved the look 3 Share this post Link to post Share on other sites
702854boy 753 #25572 Posted March 29 3 minutes ago, lynnmor said: That is a nice snow shovel, most are plastic today. I will agree, it worked pretty good to shovel snow over the winter and it was lighter than a plastic one so I didn't hurt myself as much shoveling. Share this post Link to post Share on other sites
702854boy 753 #25573 Posted March 29 1 minute ago, pfrederi said: Father had a 1959 Chevy Impala 4dr hard top Gray 283 powerglide loved the look Ours is a 2 door Biscayne with a Blueprint 396 and 5 speed in it. 59's are one of the coolest looking cars there is 6 Share this post Link to post Share on other sites
ML3 2,311 #25574 Posted March 29 (edited) Got ambitious & hopeful that the snow is done. I'm sure I'm wrong but took plow off 654 & put on mower deck. Looked at yard, especially the front & decided to mow. Back yard was still wet & muddy in places. Right tie rod broke loose at ball/socket. Had to knock it back in a couple times w/hammer to get finished. Went thru my stash of junk & found a new set of the rods. Not a really pretty tractor but its been a really reliable worker, mowing, plowing, hauling trailers, etc. Edited March 29 by ML3 9 1 Share this post Link to post Share on other sites
mrc 1,075 #25575 Posted March 30 hello 702854boy, LOVE those cragars! 1 Share this post Link to post Share on other sites
