WHX?? 54,776 #25426 Posted yesterday at 12:11 AM (edited) Since the 867 is done brought this one in. This is the mother of all originals. Only thing that wasn't was the cigar lighter & quickly replaced. Lift cable broke & fan screen gone that's it. Well la dee da. Needs a bath, a little degreaseing and the new to check list. Just can't believe how unmolested this thing is. Yes thats the orginal seat! The deck is super quiet so just clean that up & check over. I really lucked out on this one and you guys would rip yer shirts off i told ya what I paid. It may go in the living room when done I'll help her pack. Edited yesterday at 02:05 AM by WHX?? 12 Share this post Link to post Share on other sites
c-series don 11,308 #25427 Posted yesterday at 01:20 AM @WHX?? What are you plans for it other than putting it in the living room and admiring it? 4 Share this post Link to post Share on other sites
WHX?? 54,776 #25428 Posted yesterday at 01:33 AM 2 minutes ago, c-series don said: you plans for it Was supposed to take over mid mount grading duties from the 857 ... now not so sure. A tractor camp mower for sure. Deck seem to lift higher so easy to load without hanging up. 5 Share this post Link to post Share on other sites
ebinmaine 77,207 #25429 Posted yesterday at 09:47 PM We're expecting 7 ish inches of snow tonight and more Monday. The BBT has her Military Tribute Tractor "Millie" ready to go. I have The Ugly Bruce tractor being warmed on the engine. Both rigs have the batteries on trickle charge. The cars are all tucked away in the barn. Generator is full of non ethanol fuel. ⛽️ Propane for the stove is full. Both interior wood racks are full. Plenty of coffee and creamer. Bring it!! 5 2 Share this post Link to post Share on other sites
SylvanLakeWH 30,545 #25430 Posted 23 hours ago Geez @ebinmaine... kinda overkill when all you really need to do is send BBT out there... 6 Share this post Link to post Share on other sites
pfrederi 19,848 #25431 Posted 23 hours ago Millie's plow seems to be way out in front of the tractor??? I see you have the same issue i do the Exhaust (i have the same set up on mine) on ugly bruce heats up the blade and you get ice build up on the back especially...and a bit on the front. 1 Share this post Link to post Share on other sites
ebinmaine 77,207 #25432 Posted 22 hours ago 52 minutes ago, pfrederi said: Millie's plow seems to be way out in front of the tractor??? Yep. That's a Long Frame on a short tractor. It appears even longer because of the angle of the blade we use. 52 minutes ago, pfrederi said: I see you have the same issue i do the Exhaust (i have the same set up on mine) on ugly bruce heats up the blade and you get ice build up on the back especially...and a bit on the front. It do. Yessir. I also haven't done a smooth paint job or any type of lube on the blade. We don't find it too important here because there's plenty of open space for extra pushage. 2 Share this post Link to post Share on other sites
702854boy 482 #25433 Posted 22 hours ago It looks like the left front needs a little air there @ebinmaine Share this post Link to post Share on other sites
ebinmaine 77,207 #25434 Posted 22 hours ago 6 minutes ago, 702854boy said: It looks like the left front needs a little air there @ebinmaine It's good. She keeps em low and those are wide for the rim. Soft tire = better traction. 2 Share this post Link to post Share on other sites
Easton Rich 951 #25435 Posted 20 hours ago On 2/9/2026 at 9:01 AM, WHX?? said: make sure the lever goes UNDER the cam lobe. Ask me how I know ... Very important! Ive had one snap off and fall into the engine! If that happens, you've gotta pull it. 2 Share this post Link to post Share on other sites
WHX?? 54,776 #25436 Posted 20 hours ago (edited) 3 hours ago, ebinmaine said: 7 ish inches of snow tonight Got 8 ish of that really wet heavy crap. It was really like blowing concrete. Kept plugging up the single so took that hooby doo out of the inside of chute and helped but just blew it everywhere. Out come the deuce. How much you get @Achto it was weird 10 miles away as the crow flies they only got 1". Edited 20 hours ago by WHX?? 3 Share this post Link to post Share on other sites
Achto 30,933 #25437 Posted 19 hours ago (edited) 32 minutes ago, WHX?? said: How much you get @Achto About 6" at my house. Oshkosh had maybe 2" Edited 19 hours ago by Achto 3 1 Share this post Link to post Share on other sites
ebinmaine 77,207 #25438 Posted 11 hours ago Still snowing lightly... but we only got maybe 5 inches. This was a nor' easter and we live on the southern side of the mountains. Usually we end up with less than the other side of the ridge. Looks like another 4" forecast for Monday. 4 Share this post Link to post Share on other sites
Handy Don 15,844 #25439 Posted 4 hours ago Got tired of wrestling my mower deck around the garage in the off-season so I threw together a simple cart with casters. Now it fits nicely and isn’t tempted to fall over. 8 Share this post Link to post Share on other sites
Blue Chips 680 #25440 Posted 4 hours ago 7 hours ago, ebinmaine said: Still snowing lightly... but we only got maybe 5 inches. This was a nor' easter and we live on the southern side of the mountains. Usually we end up with less than the other side of the ridge. Looks like another 4" forecast for Monday. We got about 5" here in Brunswick as well. I just finished clearing the driveway. It's sunny and just warm enough that it's melting off the asphalt pretty quickly...just in time for more on Monday. I'd rather have rain than snow, but at least every snowstorm counts toward relieving our drought situation. I'm also hoping for a cool, wet spring, partly to lessen the drought, and also to reduce the browntail moth population. 1 Share this post Link to post Share on other sites
Handy Don 15,844 #25441 Posted 4 hours ago Brunswick Diner breakfast...👍 1 Share this post Link to post Share on other sites
Sparky-(Admin) 24,559 #25442 Posted 20 minutes ago I picked this up at one of the Wheel Horse Shows (I think ). Maybe I bought it from someone here?? Either way it caught my eye and came home with me thinking it would make a good wall hanger. That and I can’t afford the price that authentic WH signs bring. As you can tell it’s the back off of a bagger hood (bagger pic for reference). Still needs a second coat, and trying to decide if that lower wide stripe area should be “linen beige” . 4 Share this post Link to post Share on other sites