What have you done to your Wheel Horse today?

[WHX?? 54,748]

Since the 867 is done brought this one in. This is the mother of all originals. Only thing that wasn't was the cigar lighter & quickly replaced. Lift cable broke & fan screen gone that's it. Well la dee da. Needs a bath, a little degreaseing and the new to check list. Just can't believe how unmolested this thing is. Yes thats the orginal seat!

The deck is super quiet so just clean that up & check over. 

I really lucked out on this one and you guys would rip yer shirts off i told ya what I paid. 

It may go in the living room when done I'll help her pack. 

Edited yesterday at 02:05 AM by WHX??

[c-series don 11,299]

@WHX?? What are you plans for it other than putting it in the living room and admiring it? 

[WHX?? 54,748]

2 minutes ago, c-series don said:

you plans for it

Was supposed to take over mid mount grading duties from the 857 ... now not so sure. A tractor camp mower for sure. Deck seem to lift higher so easy to load without hanging up. 

[ebinmaine 77,172]

We're expecting 7 ish inches of snow tonight and more Monday. 

The BBT has her Military Tribute Tractor "Millie" ready to go. 

I have The Ugly Bruce tractor being warmed on the engine. 

Both rigs have the batteries on trickle charge.  

The cars are all tucked away in the barn. 

Generator is full of non ethanol fuel.  ⛽️ 

Propane for the stove is full. 

Both interior wood racks are full. 

Plenty of coffee and creamer. 

 

Bring it!!

 

 

 

[SylvanLakeWH 30,538]

Geez @ebinmaine... kinda overkill when all you really need to do is send BBT out there... 

[pfrederi 19,833]

Millie's plow seems to be way out in front of the tractor???

 

I see you have the same issue i do the Exhaust (i have the same set up on mine) on ugly bruce heats up the blade and you get ice build up on the back especially...and a bit on the front.

[ebinmaine 77,172]

52 minutes ago, pfrederi said:

Millie's plow seems to be way out in front of the tractor???

 

Yep. That's a Long Frame on a short tractor. 

It appears even longer because of the angle of the blade we use.  

 

 

52 minutes ago, pfrederi said:

 

I see you have the same issue i do the Exhaust (i have the same set up on mine) on ugly bruce heats up the blade and you get ice build up on the back especially...and a bit on the front.

 

It do. Yessir. I also haven't done a smooth paint job or any type of lube on the blade. 

We don't find it too important here because there's plenty of open space for extra pushage.  

 

 

 

[702854boy 480]

It looks like the left front needs a little air there @ebinmaine

[ebinmaine 77,172]

6 minutes ago, 702854boy said:

It looks like the left front needs a little air there @ebinmaine

 

It's good. She keeps em low and those are wide for the rim. 

Soft tire = better traction. 

[Easton Rich 948]

On 2/9/2026 at 9:01 AM, WHX?? said:

make sure the lever goes UNDER the cam lobe. Ask me how I know ... 

Very important! Ive had one snap off and fall into the engine! If that happens, you've gotta pull it.

[WHX?? 54,748]

3 hours ago, ebinmaine said:

7 ish inches of snow tonight

Got 8 ish of that really wet heavy crap. It was really like blowing concrete. Kept plugging up the single so took that hooby doo out of the inside of chute and helped but just blew it everywhere. Out come the deuce. 

How much you get @Achto  it was weird 10 miles away as the crow flies they only got 1". 

Edited 5 hours ago by WHX??

[Achto 30,928]

32 minutes ago, WHX?? said:

How much you get @Achto

 

About 6" at my house.

 

Oshkosh had maybe 2"

Edited 5 hours ago by Achto