-
Similar Content
-
By HyperPete
1973 16 HP horse with FEL & weight box (box just sandblasted & painted) Seat has a single 2 - 3" tear, taped. It's got a (42?" ) deck & mule, and the FEL stands go with it.
I'm taking the new rear AGs & weights off and putting turfs back on.
Recent service includes trans service (Wix filter), oil change, new plug, new choke cable, carb cleaning, and FEL fluid change.
I also have a 2nd frame/body to include. Needs a headlight, I believe I have it. Driving lights on FEL.
NOTE: I need time for my hand/wrist to heal before I can swap the rear wheels and tires.
EDIT: I added photos of the wheels and tires that will go on the back of and a couple of partial photos of the repainted weight box.
9
-
By morePEdal
*16 HP Onan Engine, 665.4 Hours
*8 Speed Transmission
*48” Snow Plow- Works Great! Set up and READY TO GO BEFORE THE SNOW!
*Nice 42” Mowing Deck, no rot or welds, smooth spindles
*OEM Wheel Weights, 50 lbs. Each
*Chains
*Valves adjusted this summer, runs great!
*Good battery
*Tires All Hold Air
*LED lights all the way around
*Manuals included
Bought a Honda tractor with 4WD and 4WS with deck, plow and snowblower so I don’t need this tractor.
Cash Only!
*WILL NOT RESPOND TO “IS THIS STILL AVAILABLE?”
*COMING SOON: Also selling a Wheel Horse 520H with a 2-Stage Snowblower. Check out that listing if you want a snowblower garden tractor!
-
By t_furl43
A Wheelhorse C-165 8 speed, nice solid tractor everything works and operates as it should, all lights works(stack will be removed before sale)unknown hours it was only an option for the 165, but the 16hp single lung cast iron K series motor starts right up and runs strong. It will need new motor mounts. Transmission shifts smooth, package comes with plow w/optional down pressure bar if you choose instead of your trunnions chain, a set of tire chains, a set of Toro brand front wheel weights and a set of generic rear wheel weights, and lastly a full set of hub caps that are in decent shape they can be cleaned up, $1000 obo. Would like to sell as package but if the right buyer was interested in the right combo of stuff for the right amount of money we could work something out. Pickup only in Millersville PA 17551
-
By Ifixoldjunk
so I spent a few hours today welding up a custom front weight bracket for my 310-8. It has two and a half inches of ground clearance with a generic 12 inch weight bolted on.
so the question is, how well do y’all think the 300 series front axle will hold the weight? It’s only 50lbs so it’s lighter than the snowblower it has to hold up in winter so I don’t think I’ll have any problems. And I really don’t intend on using it constantly.
-
By Ifixoldjunk
I had a bit of an idea for my 310-8. I’m thinking about making a weight bracket that kinda slides onto the factory wheel horse bagger mounts. Anyone ever do anything like this before? How much weight do you think the bagger mounts could hold? I probably wouldn’t put anything past 50lbs on it.
Kinda like the modern craftsman weights they mount to the rears of the tractor. I’d figure it’ll help counter balance the blower in winter
-
