Sparky-(Admin) 22,279 #1 Posted October 8, 2017 Split the cost of a bucket of parts with @Docwheelhorse at the Zagray show yesterday. Now I’m trying to figure out what we bought. If anyone can ID these parts that would be great! Some parts I know what they are such as the amp gage, but if someone knew what machine it was for that would also be great. The two WH parts packs that would have hung in a dealership are what caught my eye and sold me on the parts pile. Thanks for any input guys 👍 1 Share this post Link to post Share on other sites
squonk 42,797 #2 Posted October 8, 2017 #2 Gear deck bearing stands. I think @RDrown was looking for them 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,277 #3 Posted October 8, 2017 4120 spindle was used on these decks RM-323 and RM-363. Still available from Toro Likely what the B1212 Torrington bearings were for also. Your #1 4115 rod ends also #3 angle on the right looks like 4850 cylinder support at the axle housing for the HY-2 hydraulic lift kit. Garry 1 Share this post Link to post Share on other sites
stevasaurus 23,107 #4 Posted October 8, 2017 Those B-1212 equate to Wheel Horse #1508 changed to 252-6. They work on the input shaft of the early 2 piece transmissions for one place. Like 5025s. 1 Share this post Link to post Share on other sites
Retired Wrencher 5,658 #5 Posted October 9, 2017 Good looking parts Mike. Some look new. It is cool when you see them in there original packaging. 1 Share this post Link to post Share on other sites
