
-
Similar Content
-
By Matt_8
I just bought a 1967 WH lawn ranger and i was wondering the best place to find a rear fender pan
-
By Jeff-C175
I put together a replacement for the missing clutch handle today. I like it so much I'm going to make one for my C-175 also!
Now I need to figure out how come it's not staying DISengaged. It EASILY jumps off the detent at the slightest touch. It appears to be a new bracket / lever, judging from the paint on it, but I have not investigated further yet. Wonder if anyone has run into this and solved it?
What is the correct routing for the throttle cable? This just CAN'T be correct! It's right on the cooling fins of the engine, it's done melted the skin off the cable! Maybe it's a replacement cable and simply too short?
If someone could post a pic of the correct routing it would be much appreciated!
While looking that over I noticed some oil 'weepage' at the front of the engine. To me it appears to be concentrated right under the fuel pump. I presume there's a gasket there that may need to be refreshed?
The only other suspect is the valve cover but and that appears to be a little weepy too, but more so the fuel pump.
What say you K301 gurus?
-
By Wheel Horse 3D
I recently began pondering what all i could 3d print to dress up a horse. I'm pretty good with deaign sofware and came up with a couple small items to start, and figured i can easily print things like headlight covers, hood ornaments, and badges of all sorts.Then I wondered if maybe rather than a decal if i 3d printed an embossed plate or sorts with the appropriate graphics in 3d. These could be enamel painted, or printed in a silver that would give a brushed nickel type of finish.
Here's a couple photos of what ive created thus far in some gray test material. Please let me know what ya think.
-
By Tractorman1
I am currently fixing up my late grandfathers 310-8, but I am having trouble locating some of the replacement parts.
I am looking for both front (15x6.00-6) and rear (22x7.5-12) tires. I have cleaned up and painted the rims, but now need tires to go on them and I am having some trouble finding these size tires. I am looking for a new muffler. The old one had holes rusted through it and I had to drill out one of the screws to get it off. If anyone knows where I can find a new muffler and screws for it, or how to modify a different muffler to fit on the tractor. I am looking for a new gas cap, preferably one with out a fuel level gauge at the top. I was also wondering if there was a specific brand of oil that you would recommend for the engine? If anyone has links to, or knows any information about these topics it would be greatly appreciated if you could share that info with me.
-
By Volleballogist
Hello all,
I have owned this wheelhorse tractor since I was 5 years old. My grandfather bought this as a kit and we built it together. Unfortunately my grandfather passed a few years later taking his knowledge about this tractor with him. I need help getting this thing running again. I'm not sure on where I can buy parts, I have the original owners manual floating around somewhere but any tips or advice on where I should get started or certain questions I should be asking would be greatly appreciated. Thanks everyone!
-