mikeeyre74 289 #1 Posted July 16, 2017 Maybe this is better belongs in the transmissions section, but it isn't actually specific to transmissions… I was just looking around to see if I could find where the specifications are for volumes, gallons per minute, pounds per square inch, etc.… Whatever I might need to start thinking about fabricating up a hydraulic lift cylinder for my C120 automatic. This tractor has a manual lift arm on it, and I have been pondering putting on a hydraulic lift after looking at some of the pictures in this forum and seeing what other people have done… I spoke to a friend of mine who is more knowledgeable than I am in hydraulics, and he said we need the specifications to start ordering parts. Since I can't figure it out on my own, and I don't see what he needs in the rebuild manual that I do have, where might I find this information, or is there already a resource for putting hydraulics on a Hydro tractor that doesn't already have them? Share this post Link to post Share on other sites
daveoman1966 3,836 #2 Posted July 16, 2017 There is a kit available to add the hyd lift to the C-120 Sundstrand power unit. I have most of it in my shop...here are a few pics. to pursue this, send me an off-forum email... I am : daveoman@windstream.net 4 Share this post Link to post Share on other sites
rmaynard 16,139 #3 Posted July 16, 2017 I was going to suggest that you contact Dave, but he beat me to it. 2 Share this post Link to post Share on other sites
953 nut 58,941 #4 Posted July 16, 2017 did all the calculations years ago, all you need is the lift system from a Sundstrand "C" . Share this post Link to post Share on other sites
