-
Similar Content
-
By Jayzauto
Toro - WheelHorse Deck Chutes available. Fit 42” & 48” Side Discharge Decks. These are New & Restoration Quality. I have 2 available. $50ea/BRO
-
By neilevans1971
42in Snowthrower #79362 for sale
You pick up, as I cannot deliver.
Lot's of fun to clear a sidewalk in one pass or driveway in just a few.
I have the manual, belt and attachment parts that go with it but are not pictured. All are in good working order.
-
By Joe Warren
Wheel Horse 42” Snow Blade
Wheel Horse part # 06-42BB02 1979-86
Used On:
B-81 (6 speed), B-82, B-85, B-111 (6 speed), B-112, B-115, B-165 (5 speed),
LT-832, LT-1100, LT-1136, LT-1137, LT-1600, LT-1637. LT-1642,
SB-371, YT-12-A,
208-3, 211-3, 211-5, 211-A, 216-5,
One New Old Stock still in the original shipping carton, and one assembled used blade in very good condition (shown in photos)
$199 for NOS unit and $149 for used unit shown.
Local pick up in Easton MA. I occasionally drive to Bridgewater NJ and may be able to deliver to MA, RI, CT, Eastern NY, or northern NJ.
Please private message me if you are interested in purchasing.
Thank you,
Joe
-
By Team70R
I'm used to messing with the narrow, rear discharge decks. The deck on my newly acquired C165 doesn't seem to cut evenly with multiple passes. It cuts great with one pass but if I make a second pass the grass is super uneven! What do I need to adjust to make it cut consistently? Here are some pics after 2 passes, in the same direction
-
By mikekot3
I am replacing with new spindle assemblies of my model 78345 mower deck. I am unable to find in the manual section what the torque needed to preload the pulley to spindle
bearings under the protective covers on top of the mower deck.
I found the torque required for the blades to be 80-120 lb ft in one of the manuals here.
Please advise or tell me which manual it is found in.
Thank you,
Mike
-