RJC1965   170 #1 Posted May 30, 2017 I finally got one. 😀It looks to be a 1997 520H with 630 hrs on it. Back fins were clean and free of any gunk no leaking from underneath, haydro oil was full and clean. Also came with a 44 in two stage blower. just two spots with surface rust on the tractor. Pictures below I am excited to get my kwik way on it but first I want to do a full  comprehensive maintenance on it  and mow a few times just to make sure all is well. I am excited to join the group now what to get next 🤔 It also came with most of the manuals, front plastics not chrome hub caps as well below are a few more pictures 17 Share this post Link to post Share on other sites
AMC RULES   37,153 #2 Posted May 30, 2017 Congrats...   great lookin'  there. 2 Share this post Link to post Share on other sites
ACman   7,630 #3 Posted May 30, 2017 Welcome to   and the  ... 1 Share this post Link to post Share on other sites
EricF   589 #4 Posted May 30, 2017 Very nice Horse! I started my addiction with a 520H this spring, very much like yours. You'll love how well it'll power its way through the tough work. I've come to think of the 520H as sort of the "muscle car" version of the Wheel horse design -- big, powerful, and pretty much maxxed-out as far as the design can go. Winter's worst will be no problem with that 2-stage snowthrower!  I see in your pictures that it's got the wrong kind of clip holding the PTO together. It should have a wire lock pin through it that will stay put but won't bind up or shift like a hairpin clip can. Here's a picture of the same area on mine (bad lighting on a cellphone camera...) with the correct type of clip:   You can find these clips at any good hardware store that has the drawers of individual nuts and bolts and things, at some place like Tractor Supply or Rural King, or even big box stores' hardware section, usually in the "hard to find" drawers or bins.  In general, a lot of the hardware that holds Wheel Horse tractors and attachments together is simple standard hardware and clips and pins -- things you don't have to go to a dealer to get (expensive) specialized parts for. That's one of the things that makes it so enjoyable to keep these tractors -- routine upkeep and repairs are straightforward, no-nonsense and simple.  3 Share this post Link to post Share on other sites
Racinbob   11,784 #5 Posted May 30, 2017 Now that there is a dandy start and will cause you to acquire a full blown case of incurable Wheel Horse Addiction at a rapid pace. 3 Share this post Link to post Share on other sites
Ed Kennell   40,689 #6 Posted May 30, 2017                                                                      Like Bob says....nice start.                               Put the FEL on this one,  then get another one with a cab for the big snow chucker, then get another one for the mower deck, etc. 5 Share this post Link to post Share on other sites
AlwaysLookin80   1,308 #7 Posted May 30, 2017 Very nice 1 Share this post Link to post Share on other sites
WHX??   50,867 #8 Posted May 30, 2017 Congrats RJ ...  glad to see you got that one. might want to consider one of Matt's pedal kit as you might need one hand free for the loader controls. Any problems with her let us know as there are many experts here on 520's. 1 Share this post Link to post Share on other sites
Achto   28,911 #9 Posted May 30, 2017 Great looking tractor!! 1 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn   4,498 #10 Posted May 30, 2017 Nice 1st one, you will see what I mean.              Glenn 2 Share this post Link to post Share on other sites
Ed Kennell   40,689 #11 Posted May 30, 2017 I just noticed it is missing the rubber seal ring that seals the oil filter to the tins.  This helps to increase the air flow across the rear cylinder.   There are many posts on here detailing the things that can be done to keep the rear cylinder cool. Just do a search and read these posts. 4 Share this post Link to post Share on other sites
953 nut   58,272 #12 Posted May 30, 2017 8 hours ago, RJC1965 said: I am excited to join the group now what to get next    The 520 is the feature tractor at the "Big Show" load her up and come join the fun!   http://new.wheelhorsecc.com/modules.php?name=Content&pa=showpage&pid=2 2 Share this post Link to post Share on other sites
steelman   252 #13 Posted May 31, 2017 Very nice looking machine! Welcome to Red Square👌 1 Share this post Link to post Share on other sites
Tgtack   779 #14 Posted May 31, 2017 7 hours ago, JERSEYHAWG / Glenn said: Nice 1st one, you will see what I mean.              Glenn Tell me about it, currently have four! And welcome to Red Square! 2 Share this post Link to post Share on other sites
jay bee   912 #15 Posted May 31, 2017  RJC1965. Very nice start on your future collection. I started with one and there are now four out in the barn!!! Once you get past three , no one (meaning the one who must be obeyed) notices when another  shows up. Good luck with the Horse and we're glad your here.  Jim 2 Share this post Link to post Share on other sites
Tgtack   779 #16 Posted May 31, 2017 57 minutes ago, jay bee said:  RJC1965. Very nice start on your future collection. I started with one and there are now four out in the barn!!! Once you get past three , no one (meaning the one who must be obeyed) notices when another  shows up. Good luck with the Horse and we're glad your here.  Jim  Not true, mine keeps count, something to do with the Kohls card! 2 Share this post Link to post Share on other sites
ClassicTractorProfessor   5,366 #17 Posted May 31, 2017 (edited)  That is a very nice first Horse...while they are fun to collect, your first one will always have that special place.  fofor all the Edited May 31, 2017 by Professor1990 2 Share this post Link to post Share on other sites
Retired Wrencher   5,658 #18 Posted May 31, 2017 RJC1965  A fine start for you enjoy the ride. 1 Share this post Link to post Share on other sites
Ed Kennell   40,689 #19 Posted May 31, 2017 8 hours ago, Tgtack said:  Not true, mine keeps count, something to do with the Kohls card!  Hmmm,  Mrs K uses a "New Math" equation.      +  +  +gun + boat = cruise/year I think I'll take her to an Island this year.....I hear TMI has a nice tour, and it's only a 30 mile drive and not too expensive. 2 Share this post Link to post Share on other sites
elliot ness   1,916 #20 Posted May 31, 2017 Sweet mother of Wheel Horse's you got my favorite model 520H.and Share this post Link to post Share on other sites
RJC1965   170 #21 Posted May 31, 2017 Thank you all for the warm welcome and for pointing out some things to fix. I am going to replace that pin asap and will need to look at that plug at the rear cylinder to keep it cool. I am glad I took some close ups since it's my first Horse I was hoping if anything was amiss someone would notice. I know I will have questions in the near future but I know I am in good hands on this site.  Rod 2 Share this post Link to post Share on other sites
Tgtack   779 #22 Posted May 31, 2017 1 hour ago, Ed Kennell said:  Hmmm,  Mrs K uses a "New Math" equation.      +  +  +gun + boat = cruise/year I think I'll take her to an Island this year.....I hear TMI has a nice tour, and it's only a 30 mile drive and not too expensive. Hey, the company I work for owns the TMI unit 2 site! We "inherited" it in a buyout to expand our power distribution territory. As far as the guns go, unless I can show where I either traded or sold/bought, out comes the Kohls/JCPenny cards! 1 Share this post Link to post Share on other sites
TDF5G   2,072 #23 Posted May 31, 2017 Congratulations on your first !  She looks mighty fine.  You will enjoy it.  Fun to use and fun & easy to maintain and repair. Share this post Link to post Share on other sites
