Jump to content
jim3sr

310-8

By jim3sr, in Wheel Horse Tractors

Recommended Posts

jim3sr    2

jim3sr
Posted

would like to know what is the range of tires that will fit my 310-8 with a 42" deck.Have 23by8.5-12 on back and 15by6-6 on front

Share this post

Link to post
Share on other sites
 

Sparky-(Admin)    25,592

Sparky
Posted

With the rims you have those are the biggest you should run. If you wanted larger fronts you could upgrade to 8" rims...and get 16x6.50x8 rubber.

  Mike....

Share this post

Link to post
Share on other sites
 

farmer    1,081

farmer
Posted (edited)

You also have a range of choices regarding patterns, turfs, ags, ribs, some use atv tyres, it's down to what you want the tractor to do, and how you want it to look. 

Lots of images on RS, have fun choosing.  :handgestures-thumbupright:

Edited by farmer

Share this post

Link to post
Share on other sites
 

WVHillbilly520H    10,378

WVHillbilly520H
Posted

With the cheaper ags like I bought (NANCO) or Deestone, a 23x10.5-12 would be acceptable as they measure out mounted 22.5x9.50-12, Jeff.

IMAG3113.jpg

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • Tim's Toy Tractor
      3 Rib Firestone Tires, 16x6.50-8, 2 of them mounted on OEM Wheel Horse Rims, NEW!
      By Tim's Toy Tractor
      Two 3 Rib Firestone Tires, 16x6.50-8, 2 of them mounted on OEM Wheel Horse Rims, NEW!
       
      These tires are New, Never Used! Not the cheap China ones, these are High Quality Firestone Tires!
       
      Size: 16x6.50-8
       
      Great for any Garden Tractor or Riding Mower
       
      They are mounted on original Wheel Horse wheels that have been sandblasted & epoxied, and painted with ivory colored paint, note there are a few chips along the inside bead from mounting the tires. The rims will need your specific size wheel bearings installed.
       
      $99.00 Call Tim @ 1-313-460-8858        (Local Pick-Up Only, No Shipping)
       
       
       







    • Jon Paulsen
      Perfect Tires for Me :D
      By Jon Paulsen
      Inexpensive - Carlisle X Trac ATV Bias Tire - 16x6.50-8 Good quality (I expect) Should look nice with my large rear aggies  
      I don't know how much these have been discounted, but I expect anything you find like this from a good brand will be 2X to 3X the price. $45 each at Amazon. This tire is discontinued. 
       
      Rough measurement seems they are about 16" tall and the lugs are about 1/2" deep. 



    • PWL216
      Aftermarket Front Rims for C Series
      By PWL216
      Are there aftermarket front rims available for C Series tractors? I have a 120 and a 160 that need front rims… thx.
    • MachXXII
      1988 252-H Wheels
      By MachXXII
      I’m trying to restore my grandfathers old 252-H to use around my property. The tires are shot and the rims aren’t too far behind. Anyone have any recommendations for rims and tires that would fit well on it? 
       
      right now it has 22 x 7.50 - 12 on the back and 15 x 6 - 6 on the front.
    • heysavoy
      Tires for #31-12KE01 312-H
      By heysavoy
      I have a 1990 wheel horse classic model # 31-12KE01 and need to replace all 4 tires. The sizes are 15x6 8 NHS on front and 23x9.5 12 NHS Rear. I'm wondering if anyone has any specific tire they have purchased and found to be reliable? I have an acre yard with a few hills but nothing severe. I've looked at Carlisle, Marastar to name a few. Also do most folks keep the same rims and take them all in at one time to a local tire garage to have them mounted or just buy new ones with rims? Is having the correct size shown above all I need in order to make sure its an exact fit for my tractor?
×
×
  • Create New...