kudzu3 323 #1 Posted February 15, 2017 Will probably be getting a '68 commando 6 in a few days, with a 6 hp kohler, rebuilt 6 years ago (?). Owner lost the key, so I have to figure out how to hot wire it to hear it run before I close the deal. My question is, I haven't seen too many of this model and was wondering if there may be any peculiarities about it that I should know about. Seems like a solid, straight forward tractor, but I just wanted to check with the experts. Thanks. Share this post Link to post Share on other sites
N3PUY 1,031 #2 Posted February 15, 2017 The key should be the same as any other tractor. Just take your tractor key along. 4 Share this post Link to post Share on other sites
AMC RULES 37,194 #3 Posted February 16, 2017 1-4631 1968 Lawn & Garden Tractor Commando 6 4-Speed Tecumseh HH60-105047B 6 Wheel Horse 5053 1 Share this post Link to post Share on other sites
rmaynard 16,269 #4 Posted February 16, 2017 (edited) If you look at the parts list for the 1968 Commando 6, the image shows what was commonly referred to as a Snoopy key. Cole Hersee 83353 or 83357. However, my Commando 8 uses a standard key as stated above. You might want to take one of each if you have them. Edited February 16, 2017 by rmaynard 2 Share this post Link to post Share on other sites
SylvanLakeWH 28,240 #5 Posted February 16, 2017 VS. He does look like the key... At least his barn is the right color... 5 Share this post Link to post Share on other sites
Retired Wrencher 5,748 #6 Posted February 16, 2017 kudzu3 Ebay has them all the time. take a look if needed. Share this post Link to post Share on other sites
kudzu3 323 #7 Posted February 16, 2017 Well too late. I called for appt. to hear it run, and it was sold. Share this post Link to post Share on other sites
