Hacksawhero123 351 #1 Posted October 21, 2016 Does anyone know if a Raider 10 and a 1075 C-160 are the same? From pics they look the same. Thanks. Mark Share this post Link to post Share on other sites
Elkskin's mower junkyard 1,117 #2 Posted October 21, 2016 looks same measure them if they measure close then all you may need to change is hing on bottom of hood. some are different widths Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,323 #3 Posted October 21, 2016 The 1969 Raider 10 used a hood with 6x2 grill slots part number 7230. The 1970 on Raiders used a hood with 5 grill slots part number 9699 replaced by 114289 The 1975 C-160 used a hood with 5 grill slots part number 9699 replaced by 114289 114289 2-piece hood and grill joined with four 5/16"-18x1/2" self tapping cap screws and two 105038 grill plates (Suspect it came knocked down to simplify shipping) Garry 1 Share this post Link to post Share on other sites
Hacksawhero123 351 #4 Posted October 21, 2016 I was looking at this hood on eBay. From all I could tell short of running part numbers, (Thanks so much Gwest!) the eBay Raider hood looks like the same as my C160. I'll put a bid on it and see where it goes. Thanks for the help Fellas! Mark Share this post Link to post Share on other sites
