Jump to content
Schmendrickthemagnificent

Cross Reference

Recommended Posts

Schmendrickthemagnificent

Greetings, I acquired and 1967 wheel horse 657 ... the engine on the thing is a Tecumseh with a Craftsman (very odd and not original I guess lol) mdoel number 143-546122 ... Having a really hard time figuring out the Tecumseh model number, cuz the craftsman site gives me the part list and what not, but most of which don't exist anymore, so wanted to try to find the Tecumseh parts instead of going the way of craftsman...  best I can figure out so far is its an H60 engine... THX

Share this post


Link to post
Share on other sites
 
953 nut

:WRS:    This should help you.

 

wheelhorseallyears.pdf

  • Like 1

Share this post


Link to post
Share on other sites
 
gwest_ca

The Sears 143.546122 is an H60-75086B

 

This is the service manual

 

Garry

 

Share this post


Link to post
Share on other sites
 
DougC

Hello and :text-welcomeconfetti:  Enjoy the forum and your 657.  :handgestures-thumbupright:

Share this post


Link to post
Share on other sites
 
KC9KAS

:WRS:

Share this post


Link to post
Share on other sites
 
gwest_ca

The Sears 143-546122 is an H60-75086B

 

This is the service manual

 

Can't find a parts list so if you can get the Sears parts list get it. I believe their lists use the original Tecumseh part numbers.

 

Garry

 

Share this post


Link to post
Share on other sites
 
JC 1965

Hello and    :WRS:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • GeoC-120
      By GeoC-120
      The time has come for me to part with my trusty Wheel Horse and find it a new home. I am the second owner (since 2003) and it has always been stored in a garage.
      I am located about 20 minutes south of Rt 80 or 15 minutes north of Rt 78 near Rt 33.
       
      1975 C-120 Special, 8-speed (Model 1-0375, Ser. # 133357). Running (no smoke) 12 hp Tecumseh (Model HH120-120180E, rebuilt 1986). Rebuilt carb, new fuel pump, and new ignition module (in 2006). Good used replacement tank, original tank is included in the sale.  Brand-new battery, fuel filter, and shutoff valve installed 5/26. The transaxle case broke a small piece off (about 1” long by 1/4” wide) on one side of the center flange and was repaired with JB Weld.
      Solid 42” side discharge deck (Model 5-1010) bearings replaced in 2005. Extra set of Gator mulching blades and spare hi-lift blades included. Deck works as it should and is ready to cut.
      42” snow/dozer blade (Model 86-42bc010),  with Rear weights, tire chains and hardware. Blade angles left and right and lifts correctly and is ready to plow.
      Parts: 4 NOS belts and 2 good used belts, NOS taillight lenses, used starter, used ignition module, more (see pic).
      1975 C Series Owner’s manual, 1975 WH accessory catalog, 5-1010 deck manual, original HH-120 manual, updated Tecumseh HH-120 technicians handbook.
       
      Selling entire package for $325 Or Best Offer - Deck/Blade/Weights/Parts alone are worth that!
       
      Will deliver within 50 miles of zip 18064. Delivery over 50 miles is negotiable.
       
      Please PM to contact

      HH120_running.mp4











    • Gcw804
      By Gcw804
      I have a WH 300 series with a Kohler Magnum 10 engine and I cannot for the life of me figure out how to get the choke cable and linkage set so it will work. The numbers on the engine label  are worn off the, so I cannot give anyone that information. Does anyone have a picture or can you head me in the right direction.
       
      My arm for the linkage assembly is set at 3 o'clock and 9 o'clock if that helps. There seems to be several different linkage rods for this engine.
       
      Thanks
       
      Gary Williams

    • cJ_3D
      By cJ_3D
      Hey all!
       
      Replacing the drive belt on my 252-h. Anyone know the torque specification for the center screw when I put this pto clutch back on? I know it was on there tight it took a minute for the impact to break it loose. Thanks!
       
      CJ

    • bkarp@roadrunner.com
      By bkarp@roadrunner.com
      my magnum 12 kohler all of a sudden is blowing oil out of the carb. if rings are bad should oil be blowing out of the muffler.thanks for any help brent
    • Tinman1962
      By Tinman1962
      Recently got hold of a 656 it's has a "newer" 61/2 Briggs on it I don't believe that's right any ideas about that
×
×
  • Create New...