Jump to content
fomocojoe

1985 314-A diff lubricant

By fomocojoe, in Transmissions and transaxles

Recommended Posts

fomocojoe    20

fomocojoe
Posted

Hello! I've just picked up a 1985 314-A and I'm going through all the fluids to get her ready for spring. I drained the rear diff/ transaxle and it looks to have had something lighter than gear oil. The 314-H uses 10w30, but it's got a filter and is different than mine. I cannot source a manual at the moment for the 314-A. Can anyone tell me if it should have gear oil or 10w30 in the rear end? I know the hydro uses straight 30w. Speaking of, I also cant find the drain for the hydro (700 Eaton). Any advice?

Share this post

Link to post
Share on other sites
 

Racinbob    10,281

Racinbob
Posted

:WRS:

 

It should be in here:

 

 

Share this post

Link to post
Share on other sites
 

roadapples    6,981

roadapples
Posted

:WRS:

Share this post

Link to post
Share on other sites
 

fomocojoe    20

fomocojoe
Posted

Perfect! Thanks a bunch. I'll print that guy out for sure.

Share this post

Link to post
Share on other sites
 

slammer302    2,154

slammer302
Posted

:text-welcomeconfetti::rs:fomocojoe  good luck with the new horse.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • tomabrown77
      5060 transaxle
      By tomabrown77
      my 1067 stopped moving; limited slip had worn out long ago;  now input pully is turning , but tractor doesnt move --- very slight motion forward or backward if on level ground with no resistance.  Enough to tell me shift lever is actually changing gears.
      I suspect input shaft woodruff keys but might be something worse ... i am interested in perhaps buying a new, used,or rebuilt  transaxle if someone has one they would part with.  And any advice on opening up the transaxle and looking inside .  Or where i can find parts to rebuild it myself...
       
      ps i was on forum about 5 years ago,  forgot my username so i joined again
    • Mikey j
      Raider12 transaxle oil change
      By Mikey j
      Hi everyone, I have a 1969 raider12 6speed trans, Thant I’m going to change the oil in. But I don’t have a dipstick how do I get the two quarts in there? i tried filling from the side port only got about 700mils in. Thanks in advance!
    • BMW1
      D series transaxle axle bearing and seal installation question
      By BMW1
      I have not had to do this before and want to make sure I'm doing it correctly.
       
      Picture of bearing and seal is attached.
       
      Is the bearing supposed to fit in the groove of the oil seal or is the seal supposed to flush against the bearing?  I think the latter is correct?
       
      Thanks

    • BMW1
      D200 Transaxle Parking Brake Pawl
      By BMW1
      We are putting this transaxle back together and noticed the parking brake pawl seems to be in bad shape.
      The part is NLA but someone said it could be mig welded and filed.
       
      I have never seen what it should look like. Is there supposed to be a "notch" in the pawls or should the weld be built up and then filed so there is no "notch"?
       

    • Barcaskey
      D180 transaxle rebuild
      By Barcaskey
      I have a D-180 that broke an axle I have got all new parts and have removed transaxle from machine.  The 2 parts I am missing for re assembly are the metal screen with magnet for inside trans  and a new gasket from transaxle to pump.  I have done some looking and can not find these parts.  I have the old screen but the rubber gasket on the end of it has some rot and is apart from the screen.   The gasket is still in place but i would feel better putting in a new one before re build.  Thanks for your help
×
×
  • Create New...