mcurran 37 #1 Posted January 17, 2016 Just got informed of this site. .I have a 72 wheel horse raider 14hp , 6 speed? decal is hard to read. Its seen better days. 2 rototillers, 42" deck, snow plow, and a cultivator/plow. I have just begun the restoration process and I will be looking for some parts but really don't know where to begin looking. Any info would be appreciated. Thanks 2 Share this post Link to post Share on other sites
Racinbob 11,938 #2 Posted January 17, 2016 You found the very best place. Remember Once you determine what you need post it in the wanted section. Ebay is another source but sometimes the price gets out of hand. 2 Share this post Link to post Share on other sites
AMC RULES 37,196 #3 Posted January 17, 2016 Don't forget our very own members... here in the vendor section...you'll find lot's of great help here too. http://www.wheelhorseforum.com/forum/92-vendors/ 1 Share this post Link to post Share on other sites
mcurran 37 #4 Posted January 17, 2016 Thanks. The guy I got it from told me the engine was rebuilt 2 years ago he then put it in his garage and its been sitting there ever since. I'm in the process now of making sure everything is freed up and clean before I try and start it. Got lucky and found that wheel horse forum site yesterday. Someone there turned me on to this site. 2 Share this post Link to post Share on other sites
KC9KAS 4,744 #5 Posted January 17, 2016 @mcurran to and Share this post Link to post Share on other sites
grine_22 145 #6 Posted January 18, 2016 2 hours ago, mcurran said: Just got informed of this site. .I have a 72 wheel horse raider 14hp , 6 speed? decal is hard to read. Its seen better days. 2 rototillers, 42" deck, snow plow, and a cultivator/plow. I have just begun the restoration process and I will be looking for some parts but really don't know where to begin looking. Any info would be appreciated. Thanks Nice tractor. You do 1 and it will be an addiction from here on out. Share this post Link to post Share on other sites
Pullstart 66,839 #9 Posted January 19, 2016 Welcome to the site! Enjoy what you find here and have fun with your project! Share this post Link to post Share on other sites
TDF5G 2,073 #10 Posted January 19, 2016 (edited) Welcome to RS. There is nothing about a that you cannot find out about here. Such great a group of intelligent and helpful folks here! PS Edited January 19, 2016 by TDF5G Share this post Link to post Share on other sites
Retired Wrencher 5,792 #11 Posted January 21, 2016 I hope everything goes well for you. Just take your time. Share this post Link to post Share on other sites
