Adams94 1,069 #1 Posted January 10, 2016 Does anybody know of somebody making reproductions of the seat pans for these tractors. Thanks in advance! Share this post Link to post Share on other sites
Tankman 3,523 #2 Posted January 10, 2016 Not sure but, have heard you can replace FRP with a steel seat / fender assembly. Never had the FRP assembly, always steel. Share this post Link to post Share on other sites
shallowwatersailor 3,214 #3 Posted January 10, 2016 I think the steel pan is too "small" appearance-wise to work on a C-195. The C-195 is the only tractor that looks right to me with the plastic fender. I believe that they are the same as the other 1980-1981 "Blackhood" Wheel Horse tractors, just modified for the hydraulic levers and rear fuel fill. 2 Share this post Link to post Share on other sites
buckrancher 2,694 #4 Posted January 10, 2016 (edited) there's a guy who makes reproductions and sells them on e-bay some one on here may know him Brian Edited January 10, 2016 by buckrancher 1 Share this post Link to post Share on other sites
Adams94 1,069 #5 Posted January 10, 2016 Ok thanks! Share this post Link to post Share on other sites
Don1977 605 #6 Posted January 10, 2016 (edited) Don't know if your into metal working? Check out Kelly's Diesel C-195. Here is the tread showing his modification. http://www.wheelhorseforum.com/topic/26235-diesel-c-195/?page=8 Edited January 10, 2016 by Don1977 1 Share this post Link to post Share on other sites
Adams94 1,069 #7 Posted January 10, 2016 That's looks pretty good Share this post Link to post Share on other sites
