muz123 1,192 #1 Posted October 29, 2015 Was trying to clean the carb on my Wheelhorse 520H and managed to screw up one of the 4 screws that hold in the carb. Anyone know what screw size i need to by as a replacement?Thanks,Dave Share this post Link to post Share on other sites
boomers_influence 106 #2 Posted October 30, 2015 daveare you referring to the screws thathold the top of the carb to the body?if so they are metric but i do not know the size. ( no thread pitch gauge )if you do need one of the top four e/mail me,and i will send you one.boomers_influence@yahoo.comthe bolts from the intake to the block are 5/16 NC X 2".thank you boomer ( the used onan engine parts guy, also NOS and new ) Share this post Link to post Share on other sites
muz123 1,192 #3 Posted November 1, 2015 (edited) @boomers_influence Thanks, yes that's the screw i was referring to. If you have a PayPal account, i can pay for it.Dave Edited November 1, 2015 by muz123 Share this post Link to post Share on other sites
boomers_influence 106 #4 Posted November 1, 2015 davee/mail me you ship address.i will send for FREE.thank you. boomer 3 Share this post Link to post Share on other sites
Sparky-(Admin) 23,249 #5 Posted November 1, 2015 davee/mail me you ship address.i will send for FREE.thank you. boomer How can you not love this forum....threads like this reminds me why I spend a couple hours everyday here doing my Admin duty!Mike......... 1 Share this post Link to post Share on other sites
cheesegrader 433 #6 Posted November 1, 2015 Muz,Are you sure it is the screw that is bad.I've stripped the threads on the carb body. It was surprisingly soft, waaay softer than the screw. Share this post Link to post Share on other sites
muz123 1,192 #7 Posted November 2, 2015 (edited) I boogered up the top of the screw. The threads look ok. I also sent you the email boomer. Thanks!!! Edited November 2, 2015 by muz123 Share this post Link to post Share on other sites
