callum12 256 #1 Posted October 24, 2015 Hi all, i've done MIG and enjoyed it I also love the ease of it but i do know its not good for the thicker stuff, So stick would be best for this. I would also love to learn to TIG weld nicely, i do some machining so TIG would compliment this quite nicely. as it is with everyone space is bit of an issue so i don't want three separate machines as a result I've been looking at some multiprocessing units, i like the look of the Lincoln SpeedTec 200C but there is also the Lincoln PowerMIG 210 MP which seems almost identical??has anyone got any experience with these welders or know of a good multiprocessing unit?thanksCallum Share this post Link to post Share on other sites
Aldon 4,826 #2 Posted October 24, 2015 (edited) Razorweld 150 or the larger unit.i have the 150.its mig/tig/stick and dual voltage. 110 or 220.Good welder for money.If money was no issue, then Miller units are sweet. Edited October 24, 2015 by Aldon Share this post Link to post Share on other sites
callum12 256 #3 Posted October 24, 2015 i did have a look at miller, but yeah ££££ that unit does look pretty good, i'll look into those a little more. since I'm in the UK its 230V so i don't need to worry about dual voltage.thanks callum Share this post Link to post Share on other sites