Jump to content
cbutler49

Scott Moreau receiver hitch

Recommended Posts

cbutler49

Does anyone know where I could purchase the Scott Moreau receiver hitch for my 416 h? I welded a 2 inch receiver onto the standard wheel horse hitch but I need something a little stronger for a thousand pound boat I move around the property. I would also weld my own if there are any plans around. Thanks Chris

Share this post


Link to post
Share on other sites
 
WNYPCRepair

Not sure if this is it or not. A Scott is involved, not sure of his last name:

 

Apparently that is the same Scott:

"Here is Tom Rupprecht/Scott Moreau's  hitch on my C-105, and 518xi with the Heavy Hitch bracket"

 

  • Like 2

Share this post


Link to post
Share on other sites
 
doc724

Brian is correct.  Go to the vendors section on RS to find the Rupprecht site

Share this post


Link to post
Share on other sites
 
SALTYWRIGHT

I TALKED TO TOM YESTERDAY. HE IS MAKING SOME MORE HITCHES NOW.

Share this post


Link to post
Share on other sites
 
cbutler49

Thanks for all the responses. I just dropped a email on Tom RupprechtsWelding to build me one!  Chris

Share this post


Link to post
Share on other sites
 
cbutler49

Found Tom's email at the time of this last email. Still no response. Is there a better way to contact him? Trying to find a way to get on his list for building this hitch. Thanks Chris

Share this post


Link to post
Share on other sites
 
WNYPCRepair

Found Tom's email at the time of this last email. Still no response. Is there a better way to contact him? Trying to find a way to get on his list for building this hitch. Thanks Chris

This is Scott's web page. He only shows decals on his page, but if you use the contact form, he should be able to help you out.

http://www.redoyourhorse.com/contact-us/ 

Edited by WNYPCRepair

Share this post


Link to post
Share on other sites
 
shallowwatersailor

Found Tom's email at the time of this last email. Still no response. Is there a better way to contact him? Trying to find a way to get on his list for building this hitch. Thanks Chris

This is Scott's web page. He only shows decals on his page, but if you use the contact form, he should be able to help you out.

http://www.redoyourhorse.com/contact-us/ 

That is redoyourhorse's web site! Not the right one

Share this post


Link to post
Share on other sites
 
Fun Engineer

cbutler49
PM me your phone number and I'll call Tom and give it to him so he knows your interest. He may not check his email much.
Dave

Share this post


Link to post
Share on other sites
 
WNYPCRepair

Found Tom's email at the time of this last email. Still no response. Is there a better way to contact him? Trying to find a way to get on his list for building this hitch. Thanks Chris

This is Scott's web page. He only shows decals on his page, but if you use the contact form, he should be able to help you out.

http://www.redoyourhorse.com/contact-us/ 

That is redoyourhorse's web site! Not the right one

It's listed in Scott's profile. I assumed it is his site. 

Share this post


Link to post
Share on other sites
 
Forest Road

I have them on an314 and an Xi. You'll be very happy.

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
 
andrew.banas

I am interested in a  Scott Moreau hitch!

Share this post


Link to post
Share on other sites
 
wheelhorsebo
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • tractorboy79
      By tractorboy79
      Hello, I have a gt14 and a old brinly cultivator but I need the correct hitch to put on my tractor (clevis hitch) would clevis hitch fit on the back of a gt14 the same way as a another tractor or will I need to make adjustments? Anything helps? thanks!
    • Jayoutdoors
      By Jayoutdoors
      hey there  I would like to install a ball and pull my boat and utility tractor around the property.  I don't feel as if the design of this drawbar style is built for that not to mention low height.   What recommendations, bought or built do you have to help me out.. 
      it would be nice to keep my tiller attachment on if possible.
       
      also what did they use the bar coming from under seat for??

    • n1defan
      By n1defan
      I am taking orders for the custom heavy duty hitches that Scott and I have been building.

       
      1. regular hitch $150 + shipping

      2. XI hitch $175 + shipping

      3. custom hitch to your dimensions $150 - $200 + shipping depending on what you need and cost of materials.

      extra plates and bolts $10 To mount hitch to tractor if you don't have a rear plow mount.

      Any questions you can PM me or post here.
       
       
       

      the larger of the two is an XI hitch
    • Southkraut
      By Southkraut
      Was looking to buy rear hitch assembly on eBay don’t know what is comparable with my ‘84 c125. They all look the same. Is there much of any difference through the models? 


    • johnnymag3
      By johnnymag3
      So Ive been wondering just how much torque, and power these well built Tractors actually have. I have pulled a 1500 Full size Chevrolet truck on the flat with my C-160, Hydro, and it never grunted. I was introduced to these awesome machines in 1969 when a cousin would pull wheelies on his old beast on the pavement.....it seemed bullet proof
       
      . I was hooked then and have never waivered
       
      John
       
      Pictured is my B-80 posted for sale here only. no CL, or Ebay for me

×
×
  • Create New...