Brian Miller web site -- anybody home?

[pacer 3,177]

I really need some parts from Brian Millers web site A-1 Miller, and cant seem to get anybodys attention. Have heard in past its difficult to get service there, anybody had experience with him?

I have a K532 20hp that desperately needs rings. Seems that the K-301 carries the same bore - 3.375 std - (I actually need .020 over) and I see these shown on ebay but its for piston/rings only and I need gaskets also, which Miller shows to have. Any other option out there? I quickly found that parts for this engine are very hard to come by...

[rmaynard 16,344]

Good site for info, but don't try to interact with him. It just won't happen. He's probably away from his computer for awhile.

[Zeek 2,286]

Don't get me started . . . see Carb Post

Ultimately, he fixed my carb, but I would use him again or recommend him.

[pacer 3,177]

Boy you guys dont give a fella lot of hope

Zeek it was your post that I was thinking of - I was/am hoping maybe things have improved over the last couple years, though beings as Im in my 3rd day now of trying to make contact with no luck its not looking too good.

So Ive seen reference to a Onan guy on the forum, isnt there a big twin Kohler guy on here somewhere? I'm pretty well up on the one lungers, but not so much on the twins.

[AMC RULES 37,196]

I think this is the Onan parts guy you're thinking about...  
http://www.wheelhorseforum.com/profile/13637-boomers_influence/

[boomers_influence 106]

pacer
there is a yahoo kohler engine club.
just google it, and join.
just because a bore size is the same
does not mean it will use the same rings.
on the onan B48 and CCKA the bores are
both 3.250 but the rings are COMPLETELY different.
thank you. boomer