boovuc 1,090 #1 Posted May 3, 2015 Can someone do me a big favor and shoot a picture of the governor spring settings on their 310-8 speed MAGNUM tractor for me. I took my carb off and cleaned it up and also cleaned up the linkages and now my 310 runs real well. so well in fact, I could win a few tractor pulls because I know damn well it's maxing out over 3600 RPM. I haven't experimented with the different holes on the linkage located right at the engine label and I think that is where my issue is. A picture where the throttle and choke meet at that Kohler engine label is a good place to start. Thanks in Advance! Share this post Link to post Share on other sites
Wheel-N-It 2,967 #2 Posted May 3, 2015 Sending a PM Share this post Link to post Share on other sites
boovuc 1,090 #3 Posted May 5, 2015 Wheel-N-It sent me the pics and I did have the gov spring in the wrong holes. It made a world of difference and now I don't have to worry about someone running it wide open when I'm not around. BIG THANKS and great talking to you today! Share this post Link to post Share on other sites
