grinchsr 647 #1 Posted March 7, 2015 I just picked up a 520xi and would like to know how different the plow is from a 416 to a 5xi. Is the axle mount the same and can it be modified to make it work with the 5xi lift points? One more question - Does anyone have a pic of a complete 5xi plow assembly? Share this post Link to post Share on other sites
rexman72 210 #2 Posted March 7, 2015 the frame of the plow for a 416 is much smaller as the 416 is about 65 long as the xi series is like 75 inches or more. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,509 #3 Posted March 7, 2015 Rear hitch manuals Blade manuals Stabilizer Garry Share this post Link to post Share on other sites
royB100 0 #4 Posted March 7, 2015 Does anyone know the best way to replace the rear attachment lift cable on a wheel horse b100? I know I have to raise part of the frame off of the transmission to open up the tunnel but I don't know the best way to go about doing it. Thanks in advance! Share this post Link to post Share on other sites
grinchsr 647 #5 Posted March 7, 2015 Good info guys. THANKS Share this post Link to post Share on other sites
shallowwatersailor 3,214 #6 Posted March 7, 2015 (edited) Here is a thread with the 5xi plow discussion. Pictures of the rear Attach-A-Matic and plow. Edited March 7, 2015 by shallowwatersailor Share this post Link to post Share on other sites
grinchsr 647 #7 Posted March 7, 2015 I knew the 5XI's were different but Toro changed everything. Like I said this is my first exposure to the 5XI machines so I have a lot to learn. JUST WHEN I THOUGHT I KNEW EVERYTHING Share this post Link to post Share on other sites
redtractorfan 13 #8 Posted March 8, 2015 Yep, I have a 5xi blade on my 520Lxi and have seen the older blades and they are much shorter. It might take a bit of fabrication to make it work. Share this post Link to post Share on other sites
RMCIII 838 #9 Posted March 15, 2015 I knew the 5XI's were different but Toro changed everything. Like I said this is my first exposure to the 5XI machines so I have a lot to learn. JUST WHEN I THOUGHT I KNEW EVERYTHING You may already know this, but nothing swaps to the "xi" line, from previous lines. I am sure they can be fabricated, but it would take some serious fabrication work to do so. As stated above the "Attach - a - Matic" is completely different in size and width. Best just to find the "xi" attachments and pay what the are asking. Here is a bonus, if you find anything listed for the New Holland GT -18, 20, 22. < These attachments and parts are interchangeable and usually a little less expensive. But they are a different color. Just my Share this post Link to post Share on other sites
