Digger 66 3,488 #1 Posted January 11, 2015 Here's a new twist in loading ramps , They convert from a tongue mounted carrier to a set of loading ramps . Wish I would have thought of this . For $200.00 they're about the same price as a good set of aluminum ramps ( with added benefits ) When mine finally wear out , you can bet I'll be calling these guys . They look a lot more secure too . Mods can move this if they want as I could not find a specific category for these . 4 Share this post Link to post Share on other sites
AMC RULES 37,196 #3 Posted January 11, 2015 Nice system, neat idea. Share this post Link to post Share on other sites
Geno 1,929 #4 Posted January 11, 2015 Several uses, looks safe, I like it. Thanks Digger Share this post Link to post Share on other sites
JC 1965 1,532 #5 Posted January 12, 2015 Now that is a really great idea. I have had some close calls loading a tractor in the back of a pickup. Share this post Link to post Share on other sites
shallowwatersailor 3,214 #6 Posted January 12, 2015 This is a great idea for carrying a 90" ramp when you have a 6-1/2 foot truck bed. I would recommend using a pair of DG Tailgate Support brackets to prevent the tailgate letting go while loading/unloading. They lock on the Nader pins and latches of the tailgate. The cables have a habit of breaking at the most inopportune time. Personally though, I have taken to using a trailer for everything but small two-wheel tractors. 2 Share this post Link to post Share on other sites
motor12 367 #7 Posted January 12, 2015 (edited) I like the tail gate support, looking to get a set ASP. I have had a cable break while loading a dirt bike and don't want a repeat. Edited January 12, 2015 by motor12 1 Share this post Link to post Share on other sites
