The Walri 4 #1 Posted November 25, 2014 I have an opportunity to pick up a 42" snow blade for a B-115. Model # is 06-42BB01. It is mostly complete but needs the mounting brackets and lift rod and the turning handle assembly. [part #'s 18 and 19 from the IPL], lift rod [ #26] and turning assembly [#51]. My question is if anyone has any of these parts as some are unavailable and if not how difficult do you think it would be to fabricate the mounting brackets. Thanks everyone! Share this post Link to post Share on other sites
ericj 1,576 #2 Posted November 25, 2014 post some pictures or link to manual that shows what you need. i may have something i parted out a front mount plow a while back and still have some pieces left eric j Share this post Link to post Share on other sites
The Walri 4 #3 Posted November 25, 2014 The photo below shows the pieces I would need. Most importantly the two mounting brackets are needed the handles for raising/lowering and turning the blade I'm sure I can figure something out for. Share this post Link to post Share on other sites
ericj 1,576 #4 Posted November 26, 2014 sorry i don't think the parts i have will work on your plow mine must be a different model plow eric j Share this post Link to post Share on other sites