scotty 252 #1 Posted October 22, 2014 (edited) the arm is not lined up with the plow bracket that attaches to the lifter. Edited October 22, 2014 by scotty Share this post Link to post Share on other sites
boovuc 1,090 #2 Posted October 23, 2014 Hi Scotty, The 520 with the forward swept front axle requires an added length of plow frame in the back. If you don't have that 520 added piece, the plow bracket and lift link won't line up and the blade will contact the front wheels when angled. Is this the issue? Share this post Link to post Share on other sites
scotty 252 #3 Posted October 23, 2014 My lift arm itself is over to far to the right and the bracket on the plow is over to the left to far kinda hard to explain.w Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,499 #4 Posted October 23, 2014 How much offset is there? Garry Share this post Link to post Share on other sites
scotty 252 #5 Posted October 23, 2014 the lift arm rubs against the lift braket on the plow on the opposite side. Share this post Link to post Share on other sites
