jambur 0 #1 Posted August 29, 2014 Hi everyone, I picked up a front mower carrier last weekend but it was missing the rear height adjustment rods. was hoping someone could get me the measurements so I can make them? Any help would be great. Thanks Share this post Link to post Share on other sites
jeremi3210 742 #2 Posted August 30, 2014 Come on nobody got any pics or help!?! Guess we will have to get a 30pack and figure this out by ourselves. Share this post Link to post Share on other sites
Navig8r 132 #3 Posted August 30, 2014 I don't have any pics, but have you checked the manuals section of the site for perhaps a part diagram in a manual? Sent from my ADR6350 using Tapatalk 2 Share this post Link to post Share on other sites
jambur 0 #4 Posted August 31, 2014 Thanks navig8r for the response but the only thing I found here was a service bulletin on how to attach the front of the deck and a couple of nice pics. None that showed the rear hanger in any detail. I have checked other sites but no luck. Hoping someone will help. Thanks Share this post Link to post Share on other sites
groundhog47 347 #5 Posted August 31, 2014 What particular mower deck is this for? If it happens to be the type I have I'll get a detail for ya. Hoping it will be similar to something like these pictured... Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,500 #6 Posted August 31, 2014 Thanks navig8r for the response but the only thing I found here was a service bulletin on how to attach the front of the deck and a couple of nice pics. None that showed the rear hanger in any detail. I have checked other sites but no luck. Hoping someone will help. Thanks Go into the manuals and do a search for carrier Quite a few manuals come up. Garry Share this post Link to post Share on other sites
jambur 0 #7 Posted September 1, 2014 Groundhog47 I am going to use a 42in SD I wont have the serial number until I get home (camping) but I believe it is early 80's off a gt1600. Your pics look like there might be one in there for a measurement. I will keep my fingers crossed thanks Share this post Link to post Share on other sites
groundhog47 347 #8 Posted September 1, 2014 (edited) Groundhog47 I am going to use a 42in SD I wont have the serial number until I get home (camping) but I believe it is early 80's off a gt1600. Your pics look like there might be one in there for a measurement. I will keep my fingers crossed thanks Bright rods 102385, 3/8" dia from back of L to beginning of threads 6 5/8", overall 8 5/8" (shows as pn 19 on some 05-...mowers). There is also a 102035 rod listed as 19 on some, don't have measurement, but could be the heavier thicker rod (rusty or zinc colored one(s) on left of pic. Hope this'll aim you in the ballpark infield. Ref: Toro Consumer parts search>>>05-42MS01, 42" Side Discharge Mower, 1980 Looks as if my terminology is incorrect on what nomen./apparatus you are hunting part. Edited September 1, 2014 by groundhog47 Share this post Link to post Share on other sites
jambur 0 #9 Posted September 2, 2014 Thanks for the mesurment. It will get me started In the right direction. Share this post Link to post Share on other sites
