1slowtbss 0 #1 Posted April 20, 2014 I need to put the throttle linkage back on and didn't take picture please help Share this post Link to post Share on other sites
Foozerush 40 #2 Posted April 20, 2014 First off... What engine on what tractor would help, and a pic or two..... Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Martin 2,133 #3 Posted April 20, 2014 welcome to red square. gathering by the tags that its a 1076...... these may help you out..... a simple 'throttle linkage' in the search brings up more.... Share this post Link to post Share on other sites
1slowtbss 0 #5 Posted April 20, 2014 My 1076 with a 10hp kohler Share this post Link to post Share on other sites
1slowtbss 0 #6 Posted April 20, 2014 By the way thanks for the add Share this post Link to post Share on other sites
Martin 2,133 #8 Posted April 20, 2014 i just noticed you are from Elgin IL. Stevasaurus is probably just down the road from you, he lives in Elgin as well. theres quite a few of us in IL....... Share this post Link to post Share on other sites
1slowtbss 0 #9 Posted April 21, 2014 Here are a couple of pictures I took Share this post Link to post Share on other sites
1slowtbss 0 #10 Posted April 21, 2014 (edited) I need a starter generator for the same tractor that's what caused the tractor not to start and also need a ignition switch. I have no idea where to even look that's why I joined. Edited April 21, 2014 by 1slowtbss Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,479 #11 Posted April 21, 2014 Here is the tractor operator manual that has an illustrated parts list. Sites like this http://www.partstree.com/parts/ allow you to look up a part number and if it comes up priced it should be available from any Toro dealer including the one local to you. You have a starter/generator but it is not working? Good Kohler service manual here Garry Share this post Link to post Share on other sites
