Jump to content
PassivelyActive

520H - Good Deal?

Recommended Posts

PassivelyActive

I found a Toro Wheel Horse 520H at a local John Deere dealer. The machine looks to be in great condition with less than 300 hours on it. No real rust to speak of and the machine is probably 1 hours worh of elbow grease and one rear light cover away from looking like it just came off the show room floor. Engine fired right up and it seemed to move around the lot well. They were asking 1700, got them down to 1500, told them I needed a day or two to think it over.

Is this worth 1500 or should I move along? Thanks.

Share this post


Link to post
Share on other sites
 
ericj

some people on here are going to say its to high but it depends on what attachments it comes with and with only 300 hrs and real nice condition , i know some of the dealers around here would be asking $2500.00 and up after clean up. say if you can afford it and its a tractor you want go for it. i payed $1400.00 for my 90 520-H a few years ago at a auction and thought i got a good deal then although the price of tractors came down since then. i say again stop reading this and go get already

 

 

 

eric j 

Share this post


Link to post
Share on other sites
 
JackC

"great condition with less than 300 hours on it." $1,500 is fair.  You could pay less and spend a lot of time and money making it look as good as the one you are looking at.

 

What year is it?  Any attachments?

Edited by JackC

Share this post


Link to post
Share on other sites
 
KC9KAS

Sounds like a good deal, but YOU are the only person (unless you are married) that has to be happy! :ROTF:

 

Oh, :WRS: , and :wwp:

Share this post


Link to post
Share on other sites
 
rexman72

its a good deal if you think its a good deal and that's all that matters

Edited by rexman72

Share this post


Link to post
Share on other sites
 
racin_ny

If it's nice I would buy it for that.

Share this post


Link to post
Share on other sites
 
motox25

Price is a little on the high side in my opinion, at least in my area. But it is a great machine which with good maintenance should give you many years of good service so if you want it, I wouldn't hesitate getting it!

Share this post


Link to post
Share on other sites
 
tlb41

With those kind of hours and the condition you are saying its in I would buy it in a heartbeat. Sure wish I could run on to one like that close to where I live. The 520 is my favorite and I have a 94 520H with 700hrs and a 520-8 with 780hrs. If you buy it show us some pictures please.

Share this post


Link to post
Share on other sites
 
leeave96

If it comes with a deck and no issues, ie rough running/loose valve seats, I'd say ok price.

Share this post


Link to post
Share on other sites
 
AMC RULES

Bring that :wh: home...  :handgestures-thumbsup: 

highly doubt you'll be disappointed. 

Share this post


Link to post
Share on other sites
 
PassivelyActive

It comes with the 60 inch deck and thats it. Sounds like the price isnt out of line. I'll get some pictures up once it's home. Thanks guys.

Share this post


Link to post
Share on other sites
 
AMC RULES

:handgestures-thumbsup:   Atta boy!   :text-woo:

     :WRS:

Edited by AMC RULES

Share this post


Link to post
Share on other sites
 
MalMac

At this time of year prices start going up. When that grass turns green it will go up even more.

Share this post


Link to post
Share on other sites
 
Shuboxlover

Of all the tractors I have, my 520 is one of my favorites!!!!!

Edited by Shuboxlover

Share this post


Link to post
Share on other sites
 
HorseFixer

:WRS:

 

I got one a couple years ago for a few Hundred and although I turned it into a really nice machine it came at a cost. I have way more than $1500.00

in it. You may need to put a couple hundred in it  as there always are some hidden things but that still is not bad. Get us some pics before you pull the trigger.

 

~Duke :wh:

Share this post


Link to post
Share on other sites
 
PassivelyActive

Well, going to pick up the 520H on Saturday. Unfortunately I can't get out there any sooner (busy week at work). Will follow up with more pictures and details once I have it home. Thanks again guys.

Share this post


Link to post
Share on other sites
 
motox25

A heads up, that 60" deck is HEAVY, weighing in at around 320lbs. My trailer wasn't wide enough for it and it took 3 of us to lift it into my truck when I bought mine.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Duramax7man7
      By Duramax7man7
      Very Solid tractor!

      Newer Agro Tires on Rear and Solid Front Turf Tires. Wheel Weights on rear. Fully Swapped Forward Swept axle off of 520h. I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      $1175 OBO   -POOS

      (248) 9for3-8six3four Text or Call. I do not visit this site enough. God Bless. 

      NEW SEAT INSTALLED ON THIS TRACTOR! Started it up and ran it for a while yesterday... Forgot how nice this thing is. Tempting to keep it but it's time to send her one her way. GREAT TRACTOR! 


       


    • RJ Hamner
      By RJ Hamner
      Now that we are finding more uses for the 1990 520H with a KwikWay loader I am experiencing some power loss in the hydro after about a half hour to 45 minutes??????
      Ideas?
    • lodestonefarm
      By lodestonefarm
      Selling my trusty WH520H.  ~880 hours (currently used for moving snow when needed so hours may rise) very solid machine, strong and hardworking.  20HP Onan, hydro transmission and hydraulic lift.  Has Matt's foot-pedal conversion for forward/reverse.  Included in the sale is a tall-chute snow blower and 60" mowing deck.  The blower is in excellent condition and is on the tractor currently.  The mowing deck has been a workhorse over the years.  No holes but could use some TLC, probably needs new spindles at some point and could use a couple spots touched up with welder also does NOT have any pulley covers/protectors (see photo).  Tractor has been an incredible tool, very solid and dependable and I'm certainly going to miss her when she's gone.   
       
      Recent maintenance: replaced the plugs this summer, fluids as needed (hydro has about 100 hours on fluid/filter; oil was done in the spring and has about 25 hours on it).  Battery is about 3 years old as are the tires, Terra Trac tires on the rear and turfs on the front.  The seat (with arm rests) isn't in great shape.  I've got a cover for the seat, never used.  It's never really bothered me but new seat cover is included in sale as are 4 hub caps, chains for the rear tires, and some misc spare parts (see photos).  
       
      I've owed this machine about 8 year and put ~350 hours on her.  She's not a show piece but could be restored.  Sheet metal is generally in shape, no rust however the hood does have a couple dings in it.  
       
      I'm only selling because I'm trying to help my son get a small lawn care business started and looking to move to a zero-turn.  The 60" deck is too large for our trailer, the mowing deck lacks pulley safety shields, and we'd like something that mows faster.  My only complaint with this machine is the top-speed (which isn't great when comparing to today's machines) otherwise she's a beast.  They don't make them like this anymore.  





    • Workin_Horses
      By Workin_Horses
      Nice solid clean 60" deck for 520H Model # C560SC04       $500 OBO





    • RJ Hamner
      By RJ Hamner
      I have a new-to me 1990 520 with a KwikWay loader. Have been going thu piece by piece and checking for anything that needs attention. Found some wobble in the rear hubs (both sides) the key ways on both the axles and hubs shoe some pretty heavy wear.  Was wondering if you have used the hub repair kits that A-Z sells and any comments good or bad?
      Thanks
      Bob
×
×
  • Create New...