Buda 11 #1 Posted November 14, 2013 So I was taking my engine apart today for a tune up and a good cleaning. Pulled the fuel pump and there is no arm. I read on here that some were crank case pressure actuated, how do I tell if that is what I have? I pulled the oil pan to see if it was down there and found nothing. Thanks Tom Share this post Link to post Share on other sites
squonk 39,124 #2 Posted November 14, 2013 My K181 on my 704 is a vacuum pump. The hole in the pump should be completely empty. I would think if it had an arm and it broke, you would see evidence that something had broken. Share this post Link to post Share on other sites
Buda 11 #3 Posted November 14, 2013 I thought so as well.....I'm good with that. Thanks much Share this post Link to post Share on other sites