Dieselcowboy 210 #1 Posted November 12, 2013 Would any one have a pic of what the dash support for a cab on a c series looks like. I can see them in the manual but its not real decriptive. This bolts on both sides of the dash. May have to make some if I can't find them on a parts cab. The cab wiggles alot , Bet these do more than what I think they would. Share this post Link to post Share on other sites
MalMac 1,332 #2 Posted November 12, 2013 What year of C's? If it's a 79 or later there is a support that bolts onto the lower dash plate's upper two bolt holes that extends outward on both sides to bolt onto your uprights on each side. If I get where the tractor is at today I'll take a pic. Share this post Link to post Share on other sites
AMC RULES 37,196 #3 Posted November 12, 2013 While not a C series pictured... your setup should be similar. 1 Share this post Link to post Share on other sites
Dieselcowboy 210 #4 Posted November 13, 2013 It will be different than the one in the pic. Almost like an A frame type deal I think, Share this post Link to post Share on other sites