Jump to content
Sign in to follow this  
Followers 0
kramersoundcheck

engine paper waights

By kramersoundcheck, in Engines

Recommended Posts

kramersoundcheck    8

kramersoundcheck
Posted

who has ore pics of blown up k241's?

 

 

Share this post

Link to post
Share on other sites
 

WH nut    553

WH nut
Posted

I have an 8hp just like that, Need to get parts ordered for it tomorrow. Who do you all go through. I have used

The Man's One Stop Shop but he is just an EBay store and i cant remember my password. Im going to try and call tomorrow to see if they will take a phone order. an 8hp kit is only 80 bucks

Share this post

Link to post
Share on other sites
 

kramersoundcheck    8

kramersoundcheck
Posted

 

I have an 8hp just like that, Need to get parts ordered for it tomorrow. Who do you all go through. I have used

The Man's One Stop Shop but he is just an EBay store and i cant remember my password. Im going to try and call tomorrow to see if they will take a phone order. an 8hp kit is only 80 bucks

 

petes small engine.com         http://www.petessmallengine.com/html/page_042.html

Share this post

Link to post
Share on other sites
 

WH nut    553

WH nut
Posted

 

 

I have an 8hp just like that, Need to get parts ordered for it tomorrow. Who do you all go through. I have used

The Man's One Stop Shop but he is just an EBay store and i cant remember my password. Im going to try and call tomorrow to see if they will take a phone order. an 8hp kit is only 80 bucks

 

petes small engine.com         http://www.petessmallengine.com/html/page_042.html

 

Doe he carry complete Kits?

Share this post

Link to post
Share on other sites
 

kramersoundcheck    8

kramersoundcheck
Posted

i dident check,  i think so

Share this post

Link to post
Share on other sites
 

Fordiesel69    271

Fordiesel69
Posted

Get the crank checked out before ordering.  I had to end up buying a nice used on off fleabay for $99. 

 

Also I was a dummy and got the wrong piston too.  Had to go all the way to 0.020.

Share this post

Link to post
Share on other sites
 

kramersoundcheck    8

kramersoundcheck
Posted

Get the crank checked out before ordering.  I had to end up buying a nice used on off fleabay for $99. 

 

Also I was a dummy and got the wrong piston too.  Had to go all the way to 0.020.

20 over is never a bad thing :happy-jumpgreen:

Share this post

Link to post
Share on other sites
 

MarkPalmer    81

MarkPalmer
Posted

That rod blew up real good, a real fine show and tell specimen.  :)

 

-Mark-

Share this post

Link to post
Share on other sites
 

can whlvr    994

can whlvr
Posted

did it destroy the crank?

Share this post

Link to post
Share on other sites
 

kramersoundcheck    8

kramersoundcheck
Posted

did it destroy the crank?

nope,  crank and cam are all good... after siting for 9 years you cant expect every thing to go smooth.  shes running great now

  • Like 1

Share this post

Link to post
Share on other sites
 

kramersoundcheck    8

kramersoundcheck
Posted

i think this winter would be a perfect time for a full resteration. :techie-eureka::deadhorse:

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • Gcw804
      Choke Assembly
      By Gcw804
      I have a WH 300 series with a Kohler Magnum 10 engine and I cannot for the life of me figure out how to get the choke cable and linkage set so it will work. The numbers on the engine label  are worn off the, so I cannot give anyone that information. Does anyone have a picture or can you head me in the right direction.
       
      My arm for the linkage assembly is set at 3 o'clock and 9 o'clock if that helps. There seems to be several different linkage rods for this engine.
       
      Thanks
       
      Gary Williams

    • cJ_3D
      PTO clutch support screw torque
      By cJ_3D
      Hey all!
       
      Replacing the drive belt on my 252-h. Anyone know the torque specification for the center screw when I put this pto clutch back on? I know it was on there tight it took a minute for the impact to break it loose. Thanks!
       
      CJ

    • bkarp@roadrunner.com
      oil problem
      By bkarp@roadrunner.com
      my magnum 12 kohler all of a sudden is blowing oil out of the carb. if rings are bad should oil be blowing out of the muffler.thanks for any help brent
    • Tinman1962
      656
      By Tinman1962
      Recently got hold of a 656 it's has a "newer" 61/2 Briggs on it I don't believe that's right any ideas about that
    • Little Red Horse
      Wheel Horse Electro 12 Automatic
      By Little Red Horse
      Hey all. I have a Electro 12 with a factory belly blade. It runs* and drives. I had used it to grade my driveway the last 6 yrs. Having moved I'm looking at my options on storing it or selling it. Frankly I have no idea what it is worth. I watched "ISaveTractors" video on 5 things to do with a new to you wheel horse/12hp kohler. (When i got it 6yrs ago) And went thru and did the adjustments and replaced the parts mentioned. It has been a good strong tractor for me until around July of this year. (2023)
      *Around July it started dying after running 20-30min. I replaced the carb (Chinese Amazon purchase) with one from isavetractors web site. That seemed to help it idle smoother(the old carbs jets wouldnt adjust), but it still dies at around 20-30min.
      So I've got 2 questions. 
      1. What is it worth? (As-Is) and
      2. What do I need to do to fix it? 
      Thanks yall!

×
×
  • Create New...