tracer 3 #26 Posted May 30, 2013 I'm sorry,,,I meant the small gear that the input shaft meshes with. I think it is the 2nd and 3rd gear. Yes it is a 5025 transmission on a 653 wheel horse. Share this post Link to post Share on other sites
stevasaurus 22,273 #27 Posted May 30, 2013 OK...yes, I have one, and that also will work in your transmission, but the one in your picture looks better then mine...pretty worn on the outside gear. Wheel Horse # 3523...2nd/3rd fork gear. Share this post Link to post Share on other sites
tracer 3 #28 Posted May 31, 2013 PM me with a quote on the input shaft and cluster gear. Share this post Link to post Share on other sites
stevasaurus 22,273 #29 Posted June 1, 2013 Was great talking with you today. Keep the pictures coming as you continue please. Share this post Link to post Share on other sites
tracer 3 #30 Posted June 13, 2013 Got the transmission back together and everything is running well. Smooth shifting and sounds great. But only took 1 quart of oil to fill it up. I think it should take 11/2 to 2 quarts,,,,right. Thanks to all that helped me with advice, parts, and video on rebuild. 1 Share this post Link to post Share on other sites
stevasaurus 22,273 #31 Posted June 13, 2013 Glad to help and glad you got here back together. 1 quart of oil is about right. With the transmission level, fill until the oil starts to run out the plug hole just under (I think) the right axle. Share this post Link to post Share on other sites