Wheelhorse84 87 #1 Posted April 17, 2013 So I have never replaced blades before on a deck I bought a new set from my WH dealer by my decks serial #. I installed them properly but every now and then when spinning by hand the ends of the blades touch. It doesn't happen every time. Very weird. Any tips. Are they supposed to be installed a special way? Share this post Link to post Share on other sites
WH854 44 #2 Posted April 17, 2013 So I have never replaced blades before on a deck I bought a new set from my WH dealer by my decks serial #. I installed them properly but every now and then when spinning by hand the ends of the blades touch. It doesn't happen every time. Very weird. Any tips. Are the supposed to be installed a special way? My 42' deck calls for P/N 106636 (13 7/8" long 3/4" center hole) some 42" decks call for P/N 106635 and 106108 (14 1/2" long 2" wide 3/4" center hole. I found out the hard way Chas Share this post Link to post Share on other sites
dbartlett1958 96 #3 Posted April 18, 2013 If the blades touch at all when you rotate them, something is wrong. Share this post Link to post Share on other sites
