leeave96 487 #1 Posted April 3, 2013 I've got a slot hitch and a clevis hitch moldboard plow. Do you know if an adapter was ever made to make the clevis implement fit the slot hitch? Thanks! Bill Share this post Link to post Share on other sites
TT-(Moderator) 1,129 #2 Posted April 3, 2013 uh-huh There are a few older topics/posts with actual pictures. 1 Share this post Link to post Share on other sites
Lane Ranger 10,530 #3 Posted April 4, 2013 Brinly made these adapters and sold them for years. They sometimes are on Ebay for sale. Share this post Link to post Share on other sites
MaineDad 85 #4 Posted April 4, 2013 I have one for sale. PM me if you are interested. Share this post Link to post Share on other sites
Tankman 3,515 #5 Posted April 5, 2013 Any idea of a part number of the slot (or sleevee) hitch? I might want to install the slot hitch on one of my 400's. If so, do I need the chain and rod ass'y? Can I just use the cable? Share this post Link to post Share on other sites
leeave96 487 #6 Posted April 5, 2013 (edited) Any idea of a part number of the slot (or sleevee) hitch? I might want to install the slot hitch on one of my 400's. If so, do I need the chain and rod ass'y? Can I just use the cable? I'm using the clevis hitch arrangement on my tractors and just swapping out the clevis hitch bracket for the slot hitch bracket. I know don't know off hand the part number, but the manuals for both (which have the part numbers) are available for download on this website - which I have done myself. I haven't did the swap of hitch brackets yet, but plan on using the clevis hitch cable/chain assembly as is. Good luck! Bill Edited April 5, 2013 by leeave96 Share this post Link to post Share on other sites
slovinski 42 #7 Posted April 5, 2013 I am looking for one also, wasn't someone reproducing them? Share this post Link to post Share on other sites