Throttle & Choke Cables

[Old Iron 0]

I am overhauling the K241 in my 1057 and I want to replace the throttle & choke cables, too. I have the original and a downloaded copy of the owners manual. The exploded view showes the 9/16-18 nut and the shakeproof 9/16 washer, but doesn't mention the cables. Can anyone give me the original part numbers on both of these? Thanks in advance for any info.

[rmaynard 15,953]

#5170 - Choke, New number, 102118

#6484 - Throttle, New number, 102119

[TT-(Moderator) 1,147]

Additional discussions of the replacement cables:

 

 

[Martin 2,133]

im at the stage again where i need to decide whether to do the same as on the 1057 and take a chance with the ebay aftermarket cables again.......

this time around it will be for kents 875 and i just dont know whether it would be smart to put them on a kids tractor. i dont think hes going to be as 'careful' with that throttle cable as i am......

im almost convinced i need to swap in a later c series type dash.

[puddlejumper 67]

Yes ,Martin Kids definetly get along better with the newer levers than they do with the push,pull cables or mine do anyway thats including the wife.

[Terry M-(Moderator) 2,206]

im at the stage again where i need to decide whether to do the same as on the 1057 and take a chance with the ebay aftermarket cables again.......

this time around it will be for kents 875 and i just dont know whether it would be smart to put them on a kids tractor. i dont think hes going to be as 'careful' with that throttle cable as i am......

im almost convinced i need to swap in a later c series type dash.

Martin, Thanks, I'll be carfull what I buy...    Edited March 13, 2013 by Terry M

[Old Iron 0]

Thanks for the info everyone. Sorry for the late reply, busy...busy...busy...