leeave96 487 #1 Posted February 21, 2013 Would anyone have a close-up of their moldboard plow hooked-up to their slot hitch. I'm going to try to adapt a clevis/sleeve hitch type moldboard to a slot hitch and need to make a slot hitch to clevis bracket and need to see where the plow beam mounts in relationship to the slot hitch. Anyone made such an interface - slot to clevis? Pics of it? Thanks! Bill Share this post Link to post Share on other sites
MalMac 1,328 #2 Posted February 21, 2013 If your plow is a Brinly, they have or had a slot tongue hitch bracket that bolts in the plow instead of the clevis. On my plow I just changed it over to the clevis. http://brinly.com/graphics/diagrams/PP_51BH.pdf This is the parts diagram for the brinly plow. Part 12 is what I just put on and took off the one for a slot hitch. They don't show the slot hitch one in the diagram, maybe you could contact them to see if it can still be obtained. I know this is not what you ask for but it might be an option if your trying to convert to a slot. Share this post Link to post Share on other sites
Kelly 1,028 #3 Posted February 21, 2013 I built one years ago, here is a post with a few pics in it. Share this post Link to post Share on other sites
squonk 39,006 #4 Posted February 21, 2013 Here are the adapters that I made. Share this post Link to post Share on other sites
leeave96 487 #5 Posted February 21, 2013 (edited) Kelly - very nice and heavy duty looking too! Squonk - your's look great too! Edited February 21, 2013 by leeave96 Share this post Link to post Share on other sites
Iggy68 28 #6 Posted February 22, 2013 Here is the one I just finished. Share this post Link to post Share on other sites
HorseWhisperer 243 #7 Posted January 17, 2014 Here is the one I just finished. How did it work?Any updates?I'm building one tonight. Share this post Link to post Share on other sites
