duke 49 #1 Posted December 5, 2012 I recently bought some parts and part of the collection was this Ford LGT165 with a K-341 16 hp but I can't identify the piston, almost looks like an Onan, any help would be greatly appreciated. Share this post Link to post Share on other sites
rmaynard 14,939 #2 Posted December 5, 2012 (edited) Measure the diameter. Looks like a K341 C-Style piston. Don't think it's a Wheel Horse Onan since it has an oil slinger on the rod cap. Edited December 5, 2012 by rmaynard Share this post Link to post Share on other sites
duke 49 #3 Posted December 5, 2012 I also found out it is a Ford LGT 165 Kohler k-341 16hp- very, very early piston and the wristpin is centered. I hope to use this on my rebuild? C-style you say, can it still be used then? The rings look good and it came out of a standard bore? Share this post Link to post Share on other sites
rmaynard 14,939 #4 Posted December 5, 2012 Check the Kohler service manual. It explains the differences between the A, C, and D styles pistons. If you want to use it in your engine, I would have the bore mic'd and the piston measured by a reputable machine shop. Share this post Link to post Share on other sites
