Anyone making HL trim plates?

[glgrumpy 35]

As you know the headlights are first thing gone on WH tractors. Even the plastic block-off is usually broken or gone. I'm wondering if anyone here makes a diamond plate aluminum cover for that area they sell? Would like a full width one for the cavity, but would look at one for just light area too if that is the choice. Four holes in corners for screws to hold it on. Anyone doing that?

[Trouty56 565]

You can still buy those plastic Wheel Horse covers....maybe you know that.

[AMC RULES 36,961]

Search "wheelhorse light" to find used light buckets, and repro lenses on ebay too.

http://www.ebay.com/sch/i.html?_odkw=wheel+horse+light&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313&_nkw=wheelhorse+light&_sacat=0

[1maidenfan 201]

Try searching "wheel horse lens" it came up with about 5 or more of them. Ebey that is.

Good luck.

[Jake Kuhn 1,547]

you can get them on partstree or ebay

[glgrumpy 35]

Was not aware "anything" was still available, plastic or lens's. Was really kinda looking for the diamond plate tho, like so many at shows have. Just trying to avoid making myself. I'll see what epay has.