New 4x8 Tiltbed Trailer

[Tap53 57]

Just thought I would show #1 of 5 trailers I will be building, this one has a few extras as for its the first one and he a good friend of mine..

also has torsion axles, built in work light on one side and strap compartment on the other side.

[SousaKerry 500]

Nice job, any idea what kinda load you can put on those torsion axles? I just picked up an old camper trailer frame myself that I intend to rebuild into my new horse hauler.

[krazy_horse 59]

Nice, Me likie!!

[Tap53 57]

Nice job, any idea what kinda load you can put on those torsion axles? I just picked up an old camper trailer frame myself that I intend to rebuild into my new horse hauler.

Thanks,

Each axle is rated 500lbs x 2 = 1000lbs, thats all he wanted for his snowmobile, but there are many options available..

[blackdogfarm 0]

WOW now thats a good trailer! Wish I had that kind of tallent with a torch

[Duff 206]

Wow! GREAT looking trailer! Nice work! (Wish you lived closer to New Hampshire.....)

Duff :thumbs:

[KC9KAS 4,741]

Nice looking trailer. Did you build it from a kit or everything custom made?

I would want a larger trailer. I have a 4' 6" X 10' trailer made from an old pop-up camper and it is only good for 1 GT at a time.....much more than 1000# and the fenders set on the tires!

[blackdogfarm 0]

hey Duff

I work in NH !!!

lebanon huh? I talked to a girl there one time, she was nice.

I am in Maine.

[Tap53 57]

Nice looking trailer. Did you build it from a kit or everything custom made?

I would want a larger trailer. I have a 4' 6" X 10' trailer made from an old pop-up camper and it is only good for 1 GT at a time.....much more than 1000# and the fenders set on the tires!

Thanks,

All custom made, just drew it out on paper and started building..

[Trouty56 565]

Tim....good to see you post....super nice work there!!!

[Rooster 191]

Nice job, any idea what kinda load you can put on those torsion axles? I just picked up an old camper trailer frame myself that I intend to rebuild into my new horse hauler.

I have a 16' trailer I built from a 19' camper. I cut 3 feet off because in Kansas 16' or shorter doesn't need tagged.

I have hauled over 3000 lbs on it, that put it on the stops!

[Tap53 57]

Tim....good to see you post....super nice work there!!!

Thanks Bob,

[AMC RULES 36,946]

Love the tilt deck on that one...will all five of them be configured the same?

[Tap53 57]

Love the tilt deck on that one...will all five of them be configured the same?

Craig, 4 will be the same, one will be 8x10 for 2 snowmobiles, with 2-160 lb lift supports and 2 small shocks under the bed to soften the drop of the bed, havent figured out the shock setup yet but that will be easy to do.

Tim