Jump to content
Sign in to follow this  
perry

another 877 question

Recommended Posts

perry

with help from you guys i tryed to adjust my hydro linkage lever today. i got the comsept of how it works now. there is a spring on the bolt but it looks like i am missing the plastic adjuster coller that would hold pressure on the cam plate. let me know if im talkin with a straight head about the coller?. ALSO, on the linkage cover plate there is a slot in the center. whats that for?. and then there is a little silver flat bar that has the top bent over witch is under the plate and conected to the rod that runs the foward-reverse handle. i dont have a clue on what that little bugger is for?....thanks guys

Share this post


Link to post
Share on other sites
 
Rollerman

Perry Your descriptions have left me a little confused?

I'll see if I can get a parts blowup pic on here or you could send one of your 877?

Will try & help best I can.

Stephen in northern IN

Share this post


Link to post
Share on other sites
 
perry

ill take a pic of what i am talking about. i tryed toro.com but it wouldnt work.

Share this post


Link to post
Share on other sites
 
perry

01hydro008.jpg

here is the pic of hydro linkage. is this the cam plate & bolt you adjust to hold pressure on the hydro lever. also the spring broke and i cant figure out where it was attached so i just put one on the keep the pedal from dropping.

Share this post


Link to post
Share on other sites
 
creekside

I will take pictures of the 875 my brother has. That should be the same. I will try to post something for you tomorow.

Share this post


Link to post
Share on other sites
 
creekside

I have the maual for that tractor all scanned in if that would help.

horse3.jpg

horse2.jpg

horse.jpg

If you need better pictures of the manual let me know. But I will still try to get you pictures of the actual linkage in the morning.

Share this post


Link to post
Share on other sites
 
creekside

The spring goes from the hole in corner of the cam bracket to a bolt sticking out down and to the right. I had a tought time getting a good picture. I hope this helps. It is a bear to get in there but it will solve the problem greatly. I just did one this spring with my brother.

SA552045.jpg

SA552051.jpg

:thumbs2:

Share this post


Link to post
Share on other sites
 
jusjeepn

Creekside, check the original post date! I think Perry either parted it out or sold it by now!

Share this post


Link to post
Share on other sites
 
perry

Creekside, check the original post date! I think Perry either parted it out or sold it by now!

i still have it . i like my little 877 too much to part with it. but i have'nt used it in 2 yrs. it sits in the shed.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...