simplicity 4041

[fourwheels0 191]

well i may be in over my head but i just bought a simplicity 4041 with a danco loader. i think it's a 1973.

there's a rough shape brush hog with it.

it has the 3 point rear hitch and rear pto

it also has front hydro connections.

it's gonna need some work but hopefully not too much money.

i'll post pics when it gets home in a couple weeks.

until then anyone with experience with this tractor or onan 19.5 engine please feel free to tell me what you know.

i have no knowledge of simplicity's or onan's.

well here's a pic of it.

the loader,hood ect is all there just not on the tractor.

[perry 82]

everything you need to know here - http://www.simpletra....asp?FORUM_ID=7

1973 simplicity 4041 - http://www.simpletra...y/1973_4041.htm

620 Allis Chalmers version

[perry 82]

_{here is parts manual for simplicity 4040 model # 990705 - http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCBEN8arJ0rE3CSl5kbp796Dq}

_{and owners manual - http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCyEN8arJZrE3CSl5kbp796Dq}

[perry 82]

manual for danco loader model # 990730 - http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCBEN8cuN7rE3CSl5kbp796Dq

[fourwheels0 191]

perry thank you very much.

perry i can't open the files.

i need to know what program created it.

[CRE1992 135]

Looks like it could be an extensive and expensive project. However I know of a complete one in NJ with bad engine for $100. Its a little rusty too from sitting outside. However it has some cat 0 implements. I might go pick it up to get some parts off of it. If I get it, Ill let you know in case you need parts.

[fourwheels0 191]

cre1992 ya let me know if you get it.

thanks.

[Kelly 1,028]

Yesterday I picked up a little round hood, and the guy had a very clean Allis 620 with 60" deck, it was very clean, he wants $1000 for it, I'd say it is a fair price with out hearing it run, if it runs like it looked, good deal, it is a beast.

[baerpath 517]

Cree if you don't pick it up or if you do. I'd be interested in the frame/body to put another diesel puller together. I have a Cat 2.2 ready to drop in it.

Duane

[CRE1992 135]

I will let you know it's not far from me it's only 20 minutes away.

[perry 82]

you need the free adobe reader to view files. make sure to uncheck the google chrome box - http://get.adobe.com/reader/

[fourwheels0 191]

perry

yup that was what i needed.

thanks.

i went out and got more pics of it and looking it over closer she's gonna need a lot of work lol.

engine work and all the hydraulic connections and hoses at the minimum.

the brush hog has some rusted through area's but not as bad as i first thought.

[perry 82]

too bad someone let it go to crud

[fourwheels0 191]

anybody want to trade? for a wheel horse.

[CRE1992 135]

I might be interested! You coming to NJ anytime soon! ?

Do you have the rest of the loader?

[perry 82]

anybody want to trade? for a wheel horse.

if only you were closer

[fourwheels0 191]

well it's home.

the hood is rusted pretty bad.

brush hog's not too bad. i've seen worse.

it has two sets wheel weights on it. total of 240lbs.

[fourwheels0 191]

ok the loader is out of the woods and should be home tomorrow.

i'll post pics of it once it's cleaned up a bit.

it's kinda rough but restore able.

the weights have been sold.

[fourwheels0 191]

it is now sold.