handyman 1 #1 Posted July 20, 2008 I have what I guess to be a Charger or maybe a Raider. All stickers have been removed and the ID tag is painted over. It seems the model # is 1 0300 6 and the serial below is 812018. I think it originally had a Tecumseh one from what the previous owner told me. Any help appreciated. Thanks. Share this post Link to post Share on other sites
Sparky-(Admin) 19,546 #2 Posted July 20, 2008 You have a 1971 Raider 10. It would of had a Tecumseh HH-100. Hopefully its got a Kohler on it now . Mike.......... Share this post Link to post Share on other sites
Sparky-(Admin) 19,546 #3 Posted July 20, 2008 Just wanted to add that if you go to this link and put in 1-0300 it will give you parts lists and drawings on yer tractor. Mike....... https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro Share this post Link to post Share on other sites
mailman 1 #4 Posted July 20, 2008 You have a 1971 Raider 10. It would of had a Tecumseh HH-100. Hopefully its got a Kohler on it now . Mike.......... Yep. I have to agree with ya there Mike. Not to start a war here, but a Kohler is kooler! By the way, Ive got a Tecumseh HH-100 if anyone needs it. (minus a carb). It does have the starter though. Share this post Link to post Share on other sites
Rod(NASNUT) 1 #5 Posted July 21, 2008 You have a 1971 Raider 10. It would of had a Tecumseh HH-100. Hopefully its got a Kohler on it now . Mike.......... Hay I have an HH100 on my charger 9 and it works fine B) Share this post Link to post Share on other sites
Sparky-(Admin) 19,546 #6 Posted July 21, 2008 Sorry Rod, just my personal preferance . I'm sure there are plenty of good runnin older Tec motors out there. Mike........... Share this post Link to post Share on other sites
Kelly 1,028 #7 Posted July 21, 2008 I've seen a few Tuckys that run good, I just can't get them too. Share this post Link to post Share on other sites
Teddy da Bear 11 #8 Posted July 22, 2008 I have 2 Tecumseh motors. One 6 horse from the lawn ranger and one 5 horse from the A-51. The 5 horse had a warped surface I believe. It was sucking air and would barely run. The 6 horse needs valve work. Share this post Link to post Share on other sites